Showing 1–32 of 186 results

Show sidebar

Black Aluminum Heatsink for Raspberry Pi

47.33 (Excluding All Taxes)
  • Aluminum Heatsink for Raspberry Pi
  • Material: Aluminium
  • Color: Black
  • Length: 14mm
  • Width: 14mm
  • Height: 7mm

Raspberry Pi 16GB SD Card With Pre-Loaded Noobs

350.00 (Excluding All Taxes)
16GB Class 10 Sandisk SD Card With Pre-Loaded Noobs Software for Raspberry Pi

ESP32 Development Board with Wifi/Bluetooth

355.77 (Excluding All Taxes)
  • ESP32 Development Board
  • Input Voltage: 5VDC
  • Operating voltage: 2.3 ~ 3.6V
  • Operating current: 80mA
  • Clock Frequency: 80 ~ 240MHz
  • Flash memory: 4MB

NodeMCU-32S ESP32 WiFi+Bluetooth Development Board

419.56 (Excluding All Taxes)
  • NodeMCU-32 Wifi+Bluetooth ESP32 Development Board
  • WIFI module: ESP-WROOM-32
  • Processor: ESP32-D0WDQ6
  • Input Voltage: 5VDC
  • Logic level: 3.3V
  • Operating current: 80mA
  • Built-in Flash: 32Mbit
  • Antenna: Onboard PCB antenna

Nano Board R3 with CH340 chip compatible with Arduino (soldered)

420.00 (Excluding All Taxes)
  • Microcontroller: Atmega328P
  • Operating Voltage: 5V
  • Architecture: AVR
  • Input Voltage (recommended): 7-12V

Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)

389.00 (Excluding All Taxes)
  • Microcontroller: ATmega328
  • Operating Voltage: 5VDC
  • Input Voltage: 7 to 12VDC
  • Digital I/O Pins: 14
  • Analog I/O Pins: 8

Uno R3 Development Board compatible with Arduino

735.85 (Excluding All Taxes)
  • Microcontroller board based on the Atmega328P
  •  14 digital input/output pins
  •  6 can be used as PWM outputs
  •  6 analog inputs

ST Link V2 Programmer For STM8 and STM32

445.00 (Excluding All Taxes)
ST Link V2 Programmer For STM8 and STM32

Pro Mini ATMEGA328P 5V-16Mhz Development Board Compatible With Arduino

447.63 (Excluding All Taxes)
  • Microcontroller: ATmega328P
  • Circuit Operating Voltage: 5V
  • Clock frequency: 16MHz
  • 6 PWM ports: D3, D5, D6, D9, D10, D11.
  • Use For Atmel Atmega328P-AU microcontroller
  • Support serial download

Raspberry Pi 3 Model A+

2,075.55 (Excluding All Taxes)
  • Raspberry Pi 3 Model A+ (Original) 512MB RAM
  • Raspberry Pi 3

STM32F103C8T6 Minimum System Board Microcomputer STM32 ARM Core Board

449.98 (Excluding All Taxes)
  • STM32F103C8T6 Minimum System Board Microcomputer STM32 ARM Core Board
  • Model: STM32F103C8T6
  • Core: ARM 32 Cortex-M3 CPU
  • Debug Mode: SWD
  • 72MHz work frequency.
  • 64K flash memory, 20K SRAM.
  • 2.0-3.6V power, I/O.
  • Reset(POR/PDR).
  • 4-16MHz crystal.

Mega 2560 ATmega2560-16AU Board for Arduino

1,499.56 (Excluding All Taxes)
  • Model Type: MEGA 2560
  • Microcontroller Chip: ATmega2560
  • Operating Voltage: 5V
  • Input Voltage: 7~12V
  • Analog I/O Pins: 16
  •  54 digital input/output pins

NODEMCU-ESP8266 Wifi Development Board on CH340g

215.56 (Excluding All Taxes)
NODEMCU-ESP8266 Wifi Development Board on CH340g

UNO R3 SMD Atmega328P Development Board Compatible with Arduino

498.63 (Excluding All Taxes)
  • Model Type: Atmega328 Uno R3
  • Operating Voltage: 5VDC
  • Input Voltage(Recommended): 7-12V
  • Input Voltage (limit): 6-20V

ESP32 CAM Development Board WiFi+Bluetooth with OV2640 Camera Module

472.55 (Excluding All Taxes)
  • ESP32 CAM Development Board WiFi+Bluetooth with OV2640 Camera Module
  • Input Voltage: 5V
  • Operating Temperature: -20~85°C
  • SPI Flash: Default 32Mbit
  • RAM: 520KB SRAM + 4MB PSRAM
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
  • Wi-Fi: 802.11 b/g/n/
  • UART Baudrate: 115200 bps

Raspberry Pi 4 Model B with 2 GB Ram

4,795.00 (Excluding All Taxes)
  • Raspberry Pi 4 
  • Pi 4 B 2GB RAM
  •  Raspberry Pi 4 Model B with 2 GB Ram

USB A To USB B Cable High Quality For Arduino

85.88 (Excluding All Taxes)
  • Cable For Arduino UNO/MEGA (USB A to B)
  • USB Type: Type-A to Type-B
  • Fully compatible with the PC
  • Length: 1.2 Meter

Male Berg Strip 20×2 Pin – Break Away Header

10.00 (Excluding All Taxes)
20x2 Pin Male Berg Strip - Break Away Header Straight

NODEMCU-ESP8266 Wifi Development Board based on CP2102 IC

289.44 (Excluding All Taxes)
  • ESP8266 Development Board
  • Serial/USB Chip: CP2102
  • Output Power(dBm): 19.5 @802.11b Mode
  • Flash Memory: 4MB
  • Support: SDIO 1.1/2.0, SPI, UART
  • 11 b/g/n Wi-Fi Direct (P2P), soft-AP

Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver-Pack of 5

60.00 (Excluding All Taxes)

Aluminum Heatsink for A4988 DRV8825 Stepper Motor Driver-Pack of 5

Raspberry Pi Pico – RP2040

290.77 (Excluding All Taxes)
  • Raspberry Pi Pico - RP2040
  • Raspberry Pico

1.5 Meter RJ45 Retractable Travel Network Cable

93.25 (Excluding All Taxes)
  • RJ45 Network Cable
  • New generic Retractable Ethernet Cable, CAT5E, Clear
  • The cable connects all the hardware destinations on a Local Area Network.
  • Ideal for use with 10/100/1000BaseT networks.
  • This 5-foot patch cable features 50-micron gold plated connectors that ensure a clean and clear transmission.
  • The RJ-45 tap from being damaged during installation.

Raspberry Pi 3 Model B- 1 GB Ram

2,750.00 (Excluding All Taxes)
Raspberry Pi 3 Model B- 1 GB Ram (Original) with micro SD port and Power Over Ethernet (PoE) Support

Set of Blue Aluminum Heatsink for Raspberry Pi

74.22 (Excluding All Taxes)

Set of Blue Aluminum Heatsink for Raspberry Pi

NANO IO Shield Expansion Board For Arduino Screw Terminals

185.00 (Excluding All Taxes)
  • Compatible with Arduino NANO
  • All digital and analog pins breakout
  • Compact size
  • Leads all pins out, which convenient for wiring and doing experiments.

Raspberry Pi 4 With 8GB RAM Model-B

10,345.76 (Excluding All Taxes)
Raspberry Pi 4 Model-B with 8 GB RAM

Micro HDMI Male To Female Adaptor for Raspberry Pi

52.00 (Excluding All Taxes)
Micro HDMI Male To HDMI Female Adaptor for Raspberry Pi 4 with gold plated connector for noiseless signal

STM32F401CCU6 Minimum System Board Microcomputer STM32 ARM Core Board

489.00 (Excluding All Taxes)
STM32F401CCU6 Minimum System Board Microcomputer STM32 ARM Core Board

Uno+WiFi R3 AtMega328p+ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO

748.44 (Excluding All Taxes)
  • Microcontroller: ATmega328IC
  • Wi-Fi Module: ESP8266
  • VIN/DC Jack: 9 ~ 24VDC
  • Input supply voltage: 3.3 ~ 5V
  • Current consumption: 800mA
  • USB to serial converter: CH340G
  • WiFi: 802.11 b/g/n 2.4 GHz
  • USB Type: Micro USB
  • USB Clock Frequency: 16 MHz
  • Memory Size: 8MB

ST-LINK/V2 in-Circuit Debugger/Programmer for STM8 and STM32

956.67 (Excluding All Taxes)
ST-LINK V2 - ST-LINK PROGRAMMER FOR STM8 AND STM32

Proto Screw Shield 1.0 For Arduino Uno

285.00 (Excluding All Taxes)
Proto Screw Shield 1.0 For Arduino Uno R3

Sandisk 32GB Class 10 Ultra MicroSD UHS-U1A1 Card-98Mbps

465.42 (Excluding All Taxes)
  • Sandisk 32GB SD Card
  • Brand: SanDisk
  • Storage: 32 GB
  • Read Speed: 98 MB/s
  • Write Speed: 100 MB/s