ESP32 Development Board with Wifi/Bluetooth
- ESP32 Development Board
- Input Voltage: 5VDC
- Operating voltage: 2.3 ~ 3.6V
- Operating current: 80mA
- Clock Frequency: 80 ~ 240MHz
- Flash memory: 4MB
NodeMCU-32S ESP32 WiFi+Bluetooth Development Board
- NodeMCU-32 Wifi+Bluetooth ESP32 Development Board
- WIFI module: ESP-WROOM-32
- Processor: ESP32-D0WDQ6
- Input Voltage: 5VDC
- Logic level: 3.3V
- Operating current: 80mA
- Built-in Flash: 32Mbit
- Antenna: Onboard PCB antenna
NODEMCU-ESP8266 Wifi Development Board on CH340g
NODEMCU-ESP8266 Wifi Development Board on CH340g
ESP32 CAM Development Board WiFi+Bluetooth with OV2640 Camera Module
- ESP32 CAM Development Board WiFi+Bluetooth with OV2640 Camera Module
- Input Voltage: 5V
- Operating Temperature: -20~85°C
- SPI Flash: Default 32Mbit
- RAM: 520KB SRAM + 4MB PSRAM
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
- Wi-Fi: 802.11 b/g/n/
- UART Baudrate: 115200 bps
NODEMCU-ESP8266 Wifi Development Board based on CP2102 IC
- ESP8266 Development Board
- Serial/USB Chip: CP2102
- Output Power(dBm): 19.5 @802.11b Mode
- Flash Memory: 4MB
- Support: SDIO 1.1/2.0, SPI, UART
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
Uno+WiFi R3 AtMega328p+ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO
- Microcontroller: ATmega328IC
- Wi-Fi Module: ESP8266
- VIN/DC Jack: 9 ~ 24VDC
- Input supply voltage: 3.3 ~ 5V
- Current consumption: 800mA
- USB to serial converter: CH340G
- WiFi: 802.11 b/g/n 2.4 GHz
- USB Type: Micro USB
- USB Clock Frequency: 16 MHz
- Memory Size: 8MB
DOIT Mini Ultra-Small Size ESP-M3 Serial WiFi Module Compatible With ESP8266
- ESP-M3 Serial WiFi Module
- ESP WiFi Module
D1 LOLIN32 ESP32 ESP-32 CP2104 Wireless WiFi Bluetooth Development Board Micro USB Dual Core CPU 4 MB Flash Module
D1 LOLIN32 ESP32 ESP-32 CP2104 Wireless WiFi Bluetooth Development Board Micro USB Dual Core CPU 4 MB Flash Module
Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with AF2569 Camera Module
- ESP32 CAM Development Board WiFi+Bluetooth with OV7670 Camera Module
- Input Voltage: 5V
- Operating Temperature: -20~85°C
- SPI Flash: Default 32Mbit
- RAM: 520KB SRAM + 4MB PSRAM
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
- Wi-Fi: 802.11 b/g/n/
- UART Baudrate: 115200 bps
- Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with AF2569 Camera Module
ESP32 LoRa SX1278 2.4 cm (0.96 “) Blue OLED Display Bluetooth WiFi Module for Arduino
ESP32 LoRa SX1278 2.4 cm (0.96 ") Blue OLED Display Bluetooth WiFi Module for Arduino
ESP32 CAM USB Programmer Rev2.0
- Part No: ESP32 CAM USB Programmer Rev2.0
- Serial Chip: CH340
- Button: Boot, EN/RST
- Interface: USB Programmer
- Connector: C Type
- ESP32 CAM USB Programmer Rev2.0
NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board
- Baseboard for Nodemcu
- The perfect solution for breaking out the pins from Lua V3 Nodemcu.
- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Onboard 5V / 1A DC-DC step-down converter circuit
- DC power jack 6~24V.
ESP32 Beginner Starter Kit V3.1
ESP32 Beginner Starter Kit V3.1
ESP8266 Serial Port WiFi Transceiver (ESP-05) Module
- Serial UART Interface
- It runs LWIP
- 802.11 bgn
- WIFI Direct (P2P), SOFT-AP
- Built-in TCP/IP
- The AT command is perfect, efficient, concise
- Support three modes: AP, STA, and AP+STA coexistence mode
- UFL Antenna Connector
ESP32-DEVKITS-R – WiFi Development Board To Flash ESP32 WROVER Modules
- Manufacturer: Espressif Systems
- Manufacturer Part No: ESP32-DEVKITS-R
- USB-to-UART Bridge
- 5V-to-3.3V low-dropout voltage regulator (LDO)
- Micro-USB Connector/Micro USB Port
- EN(reset) &Boot Buttons
- Power On LED
ESP8266/ ESP-12F Module/ Serial WiFi Witty Cloud Development Board + Mini NodeMCU
- Microcontroller: ESP8266
- Operating Voltage: 3.3VDC
- Flash Memory: 4MB
- LDR Light Sensor on board
- WS2812 Led on board
UNO Based ESP8266 Nodemcu Development Board
- ESP8266 Development Board
- Microcontroller: ESP-8266
- Input Supply: 7V ~ 12VDC
- Operating Voltage: 3.3VDC
- Digital I/O Pins: 11
- Analog Input Pins: 1
- Clock Speed: 80MHz/160MHz
- Flash: 4MB
- Based on ESP-8266EX.