TTGO LoRa32 433/868/915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Bluetooth WIFI Wireless Module-V1.6.1

TTGO LoRa32 433/868/915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Bluetooth WIFI Wireless Module-V1.6.1

LILYGO TTGO LoRa32 915Mhz V1.6.1 is a development card based on ESP32 that incorporates a LoRa 868/915 Mhz module that allows bidirectional transmission of data over long distances. It also incorporates a 128×64 pixel OLED Display (SSD1306 address I2C 0x3C) and has an interface for charging lithium batteries. In addition, it has a microUSB connector for power and programming directly from the Arduino IDE or with Micropython. This card is used to develop systems focused on the Internet of Things “IOT” and for the transition of data through Lora and thus be able to control sensors and actuators, in the same way it is designed to be able to display information to the user through the OLED Screen that it integrates and thus avoid the wiring that is typically done when you want to integrate a display into your projects. Tags, 915Mhz , AR1669 , ESP32 with LoRa , LILYGO TTGO , Ttgo , TTGO LoRa32, XY2109, Q168, TTGO LoRa32, CH9102F, LILYGO TTGO LoRa32 915Mhz V1.6.1.

Note: This Board Pin Header is not PreSolder. Solder by yourself.

Features:

ESP32:

• ESPchip: ESP32 PICO-D4
• Flash: 4MB

Wifi:

• Protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps) Polymerization A-MPDU and A-MSDU, support 0.4 μS guard interval
• Frequency range: 2.4GHz ~ 2.5GHz

Bluetooth:

• Protocol: Complies with bluetooth v4.2 BR/EDR and BLE standard
• Radio frequency: With -97dBm sensitivity NZIF receiver, class 1, class 2 and class 3 AFH transmitter
• Audio Frequency: CVSD and SBC Audio Frequency

Lora32

• Operating frequency: 868M/915MHz
• Transmission power: +20dBm
  • Reception sensitivity:
  • 139dBm @ LoRa and 62.5Khz and SF = 12 and 146bps
  • 136dBm @ LoRa and 125Khz and SF = 12 and 293bps
  • 118dBm @ LoRa and 125Khz and SF = 6 and 9380bps
  • 123dBm@FSK&5Khz&1.2Kbps
  • Frequency error: +/- 15KHz
• FIFO space: 64 bytes
• Data speed:
• 1.2K~300Kbps@FSK
• 0.018K~37.5Kbps@LoRa
• Modulation mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOK
• Interface form: SPI
• Sleep current:
• 0.2uA@SLEEP
• 1.5uA@IDLE
• Digital RSSI function
• Automatic frequency correction
• Automatic gain control
• Fast wake up and frequency hopping
• Highly configurable data packet handler
• Pins: 26(DI0 / IO0), 23(IRQ / RESET), 18(NSS / SE), 5(SCK), 27(MOSI / SDI), 19(MISO / SDO)

Battery Charging Specification:

• Battery connector: JST XH2
• Maximum charging current: 500 mA
• Charging management: IP5306

Display Details:

• OLED display
• Size: 0.96 inches
• Resolution:128×64 pixels
• Controller: SSD1306 I2C address 0x3C

Features/Specs:

• Manufacturer: LilyGO TTGO
• Manufacturer SKU: Q168 / XY2109
• Version: V1.6.1
• Model: LILYGO TTGO LoRa32 915Mhz
• MicroUsb Supply Voltage: 5V/1A
• Ignition Switch
• IPX/IPEX Connector for SMA Antenna
• Connector with thread for SMA Antenna
• USB to TTL CP2104
• Temperature range: -40℃ ~ +85℃
• Dimensions: 64.47 x 27mm x 8.54mm
• Length: 64.47 mm
• Width: 27 mm
• Height: 7.54 mm
• Weight: 35 gm

User Manual, Datasheet, Example Codes: Click Here

USB driver: Click Here

Datasheet: ESP32 PICO-D4

Package Includes:

• 1 x TTGO LoRa32 433/868/915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Bluetooth WIFI Wireless Module-V1.6.1
• 1 x 13 Pin Male Pin Header Connector
• 1 x Antenna