Showing all 30 results

L298 2A Dual Motor Driver Module With PWM Control

115.00 (Excluding All Taxes)
L298N 2A Based Motor Driver Module-Good Quality

L293D Motor Driver Shield for Arduino

124.66 (Excluding All Taxes)
  • L293D Motor Drive Shield dual for Arduino Duemilanove, Motor drive expansion board motor control shield
  • L293D Motor Driver Shield For Arduino

Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module

723.00 (Excluding All Taxes)
BTS7960 43A H-Bridge  Motor Driver Module

L9110 L9110S DC Stepper Motor Driver Board HBridge

100.00 (Excluding All Taxes)
L9110 L9110S DC Stepper Motor Driver Board HBridge

300 RPM-12V DC Geared Motor Centre Shaft

150.00 (Excluding All Taxes)
300 RPM-12V DC Geared Motor Centre Shaft

NODEMCU-ESP8266 Wifi Development Board on CH340g

195.56 (Excluding All Taxes)
NODEMCU-ESP8266 Wifi Development Board on CH340g

TYN1225 – 1200V 25A SCR Thyristor – TO-220 Package

73.00 (Excluding All Taxes)
  • Manufacturer Part No: TYN1225
  • Manufacturer: STMicroelectronics
  • Rated Repetitive Off-State Voltage: 1.2 kV
  • Forward Voltage: 1.6V
  • Gate Trigger Voltage: 1.5V
  • Current Rating: 25A

ISL83202IBZ – 4 Channel H-Bridge Mosfet Driver – SOIC-16 Package

185.96 (Excluding All Taxes)
  • Manufacturer Part No: ISL83202IBZ
  • Manufacturer: Renesas Electronics
  • Supply Voltage Range: 8.5V ~ 15V
  • Output Current: 1A
  • Clock Frequency: 200 kHz

L298N Dual H Bridge DC/Stepper Motor Driver Controller Module

187.63 (Excluding All Taxes)
  • L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
  • Driver chip: L298N Dual H Bridge
  • Supply voltage: VMS 5V – 35V
  • Peak current IO: 2A per bridge
  • Max power consumption: 20Watt

MX1508 Dual H Bridge DC PWM Stepper Motor Driver

59.63 (Excluding All Taxes)
  • MX1508 PWM Stepper Motor Driver
  • The module supply voltage: 2V-10V
  • Signal input voltage: 1.8-7V
  • Single Opera: Ting current: 1.5A
  • Peak current: up to 2.5A

Mini Motor Drive Shield Expansion Board L293D Module For Arduino UNO MEGA 2560

128.69 (Excluding All Taxes)
  • L293D Motor Driver Module
  • L293D Motor Driver shield
  • Input Voltage Range: 4.5 To 24VDC
  • Output current Per Channel: 600mA
  • Peak Output current: 1.2A

MDD3A Cytron 3A 4V To 16V Dual Channel DC Motor Driver – Seeed Studio

691.63 (Excluding All Taxes)
  • Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
  • Bidirectional control for two brushed DC motor
  • Control one unipolar/bipolar stepper motor
  • Operating Voltage: DC 4V to 16V

HG7881 4 Channel 2.4 To 10VDC Motor Driver Broad

215.63 (Excluding All Taxes)
  • HG7881 4-Channel DC 2.4-10V Motor Driver Broad
  • Operating voltage: 2.5-12V
  • Suitable for: motor operating voltage 2.5V-12V
  • Operating current: 0.8A maximum
  • No. of channel: 4

DRV8833 2 Channel DC Motor Driver

97.22 (Excluding All Taxes)
  • DRV8833 Motor Driver
  • Operating voltage: 2.7‌‌V ~ 10.8V
  • Output current: 1.2 A continuous (2 A peak) per motor
  • Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
  • Motor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor

MD10C – 10A DC Motor Driver 30A Peak Current – Cytron

1,160.63 (Excluding All Taxes)
  • Manufacturer Model: MD10C
  • Manufacturer: Cytron Technologies
  • Operating Voltage Range: 5 ~ 25VDC
  • Battery Protection Mode: Yes
  • Continuous Current: 10A
  • Peak Current: 30A

L293D Motor Driver Module

119.00 (Excluding All Taxes)
L293D Motor Driver Module

L293D Motor Driver Module

135.00 (Excluding All Taxes)
L293D Motor Driver Module

L298N 4 CHANNEL DC MOTOR DRIVER

750.00 (Excluding All Taxes)
L298N 4 CHANNEL DC MOTOR DRIVER

L293D Motor Driver Board For ESP8266 WiFi NodeMcu Lua ESP12E

149.49 (Excluding All Taxes)
  • L293D Wifi Motor Drive Shield For Arduino Node Mcu ESP8266 ESP-12E
  • Motor Power Range: 4.5V ~ 36V
  • Control supply range: 4.5V ~ 9V
  • Logical operating current Iss: ≤60mA
  • Driving part of the work current Io: ≤1.2A
  • Maximum power dissipation: 4W (T = 90 ℃)

SLA4390 PNP + NPN Darlington H-Bridge Transistor – SIP-12 Package

384.69 (Excluding All Taxes)
SLA4390 PNP + NPN Darlington H-bridge Transistor
  • Transistor Polarity: PNP+NPN
  • Collector−Emitter Voltage: 100+100V
  • Collector−Base Voltage: 100+100V
  • Continuous Collector Current: 5+5A
  • Power Dissipation: 25 Watts
  • Package: SIP-12 

2SK2698 500V 15A N-Channel Power MOSFET Package TO-3PN

122.00 (Excluding All Taxes)
  • N-Channel
  • Fast switching
  • Max Drain-Source Voltage: 500V
  • Max Gate-Source Voltage: + 30V
  • Max Continuous Drain Current, VGS @ 10 V, TC = 25 deg C: 18A
  • K2698 500V 15A N Channel MOSFET

Stepper Motor-Semifresh-5kg

744.00 (Excluding All Taxes)
Stepper Motor-Semifresh-5kg

Stepper Motor-Semifresh-4kg

595.00 (Excluding All Taxes)
Stepper Motor-Semifresh-4kg

Stepper Motor-Semifresh-3kg

392.00 (Excluding All Taxes)
Stepper Motor-Semifresh-3kg

Stepper Motor-Semifresh-2kg

342.00 (Excluding All Taxes)
Stepper Motor-Semifresh-2kg

Stepper Motor-Semifresh-1Kg

180.00 (Excluding All Taxes)
Stepper Motor-Semifresh-1Kg

Stepper Motor-Semifresh-10kg

1,185.00 (Excluding All Taxes)
Stepper Motor-Semifresh-10kg

60 RPM-12V DC Geared Motor Centre Shaft

135.36 (Excluding All Taxes)
12V 60 RPM Geared Motor Centre Shaft

L298N IC – H-Bridge Motor Driver IC

138.00 (Excluding All Taxes)
  • Type: Full Bridge
  • Operating Supply Voltage: 4.8 V to 46 V
  • Output Current: 4 A

L293D – H-Bridge Motor Driver IC – DIP-16 Package

33.50 (Excluding All Taxes)
  • Manufacturer Part No: L293D
  • Manufacturer: STMicroelectronics
  • Operating Supply Voltage: 4.5V to 36V
  • Output Current: 600 mA
  • Operating Supply Current: 2 mA