RS232 to TTL Serial Interface Module
This RS232 to TTL Serial Interface Module is a board with the MAX3232 transceiver integrated circuit (IC). It facilitates serial communication between TTL and RS232 ports by providing the necessary electrical signal conversion. These boards usually have a DB9 connector soldered at one end, and four header pins with jumper cables at the other end. The jumper cables enable the user to connect the wires to a breadboard or a microcontroller project board, whilst the DB9 connects directly to a COM port of a computer. The MAX3232CSE+ IC, which comes in a 16 pin narrow SO package. It requires between 3.0 V to 5.5 V to operate and has two receivers and two transmitters. It has a maximum guaranteed data rate of 120 kbps, and the circuitry requires four 0.1µF charge-pump support capacitors. It is also compatible with the famous MAX3232 IC pins. These boards connect to systems with a UART hence, they work with ATMEL and PIC microcontrollers.
MAX3232 RS232 Serial Port To TTL Converter Module DB9 Connector 5V RS232 to TTL + Female Serial TTL + serial modules / Brush board. This module can be used to the serial port of microcontroller module expand DVD, router, hard drive and other equipment to upgrade.
Application:
- Radio modification
- Phone flash,
- XBOX360 flash
- GPS
- Vehicle detection
- DVD flash
- Hard disk repair set-top box upgrade
Features/Specs:
- IC Chip: MAX3232
- Operating Voltage: 3.3~5.5 VDC
- It can be used to program:
STC MCU
NXP MCU
Renesas MCU
STM32 MCU
N+-2EC MCU etc.. - Pre-assembled compact size board
- Suitable for use with most microcontrollers
- Operates up to 250 kbit/s
Datasheet: MAX3232
Note: Product Images are shown for illustrative purposes only and may differ from actual product.
Reviews
There are no reviews yet.