RC522 RFID Reader Writer Module 13.56MHZ
MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the “table” application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated into all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals. The digital part of to handle the ISO14443A frames and error detection. In addition, support the rapid CRYPTO1 encryption algorithm, terminology validation MIFARE products. MFRC522 supports MIFARE series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs.
The MF522-AN module the original Philips MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader, and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card, reader. This product know as RC522, RC522 Reader Writer Module, RC522 RFID 13.56MHZ Reader Writer Module, Reader Writer Module, RFID Reader Writer Module, RFID RF Module, RFID-RC522, RFID, Radio Frequency, Radio Frequency Modules, 13.56MHz, RFID Cards, RFID Card Reader, RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
- Input Supply voltage: 2.5V ~ 3.3VDC
- Operating Current: 13 ~ 26mA
- Do not use 5V supply
- Operating Frequency: 13.56MHz
- SPI data rate: 10 Mbit/s
- operating distance in reading/Write mode: 50 mm
- Highly integrated analog circuitry to demodulate and decode responses.
- Supports ISO/IEC 14443 A/MIFARE.
- Typical operating distance in reading/Write mode up to 50 mm.
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd.
- SPI up to 10 Mbit/s.
- FIFO buffer handles 64 bytes send and receive.
- Flexible interrupt modes.
- Power-down by software mode.
- Programmable Timer.
- CRC coprocessor.
- Internal self-test.
- Length: 60mm
- Width: 39.5mm
- Height: 5mm
- Weight: 20gm
- 1 x RC522 RFID Reader Writer Module 13.56MHZ
Arduino Example: Arduino-Example-Code-for-RC522-RFID-13.56MHz
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
There are no reviews yet.