16×2 LCD Display With I2C/IIC interface – Blue LCD
This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast white text upon a blue background/backlight. This is the great blue backlight LCD display. It is fantastic for Arduino-based projects. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers. This display overcomes the drawback of LCD1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which show a good library and little coding. The I2C is a type of serial bus developed by Philips, which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up resistors. The usage voltages are standard as 5V and 3.3V.
If you already have the I2C adapter soldered onto the board like in this product, the wiring is quite easy. You should usually have only four pins to hook up. VCC and GND of course. The LCD display works with 5 Volts. So we go for the 5V Pin.
This product is known as 16×2 LCD Display with I2C/IIC interface Blue Backlight, display, I2C, I2C Interface, LCD, LCD Display, LCD Display with I2C/IIC interface, LCD1602, Module, Sensors and Modules, 16×2 Blue LCD Display With IIC/I2C Interface, 16X2 LCD Display with IIC/I2C interface – Blue, 1602 16×2 LCD Display with I2C-IIC interface – Blue or Green Backlight, LCD1602 1602 LCD Module Blue, LCD 16X2 Alphanumeric Display with I2C/IIC interface – Blue Backlight, LCD Display, I2C Interface, I2C, LCD1602, Display for Arduino Uno, 1602 (16×2) LCD Display with I2C/IIC interface – Blue Backlight.
Features:
- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings.
- 16 characters wide, 2 rows
- White text on the Blue background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Interface: I2C
- Interface Address: 0x27
- Character Color: White
- Backlight: Blue
- Supply voltage: 5V
Features/Specs:
- Model: LCD1602
- Characters: 16
- Interface Type: I2C
- I2C Address: 0x27
- Character Color: White
- Backlight: Blue
- Input Voltage: 5V
- Length: 36 mm
- Width: 80 mm
- Height: 18 mm
- Weight: 35 gm
Datasheet:
Package Includes:
- 1 x 16×2 LCD Display With I2C/IIC interface – Blue LCD
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Aravind –
Nice product and Delivery on time.
thank you.