ZMCT103C – 10A Range Single Phase Current Transformer Module – 2.54mm JST Connector
The module is equipped with the ZMCT103C series of small high-precision current transformers and high-precision op-amp circuits for accurate sampling and proper compensation of signals. It is convenient for signal acquisition of AC power within 5A. The corresponding output analog AC signal can be adjusted. The required output voltage can be adjusted according to the potentiometer (adjusting the amplification ratio, the amplification range is 0-100 times), but the maximum voltage at the output (OUT) will not exceed 1/2 VCC. Tags, ZMCT103C AC Current Sensor Module, ZMCT103C, ZMCT103, 10A range single-phase AC active, 10A Current Sensor, Current Sensor, 10A Current Transformer Module, 10A Current Sensor.
To buy more Current Sensor Modules: Click Here
Features:
- Current Ratio: 5A:5 mA
- Rated Primary Current at 50/60 Hz: 10A
- Winding D.C. Resistance at 20 °C: 155Ω
- Maximum Primary Current at 50/60 Hz: 20A
- Transformer Turns Ratio: Np: Ns = 1000:1
Features/Specs:
- Manufacturer Part No: ST2010SM1316
- Manufacturer: SHARVI TECHNOLOGIES (OPC) PRIVATE LIMITED
- Model: ZMCT103C
- Input Current : 0-10 Ampere (50Ω)
- Rated Output Current: 5mA at Input 5 Ampere
- Turns ratio: 1000:1
- phase angle Error: input 5A, Sampling Resistor 50Ω
- Accuracy class Class: 0.2
- Linearity: ≤0.2%
- Permissible error -0.2%≤+0.2%
- Isolation Voltage: 4500 Volts
- Encapsulation: Epoxy
- Working temperature: -40 to +85 degrees
- Connector Pitch: 2.54mm
- Length: 38 mm
- Width: 25 mm
- Height: 23 mm
- Weight: 10 gm
Application:
- Measuring AC currents
- Monitor any current surges
- Ground fault detection
- Household electrical equipment
Datasheet: ZMCT103C
Package Include:
- 1 x ZMCT103C – 10A Range Single Phase Current Transformer Module – 2.54mm JST Connector
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.