W5100S – WIZnet Ethernet HAT
The WIZnet Ethernet HAT is a small, versatile expansion board designed to add Ethernet connectivity to single-board computers such as the Raspberry Pi. The HAT (which stands for “Hardware Attached on Top”) plugs directly into the Pi’s 40-pin GPIO header and includes an Ethernet controller chip, RJ45 connector, and associated circuitry. The WIZnet Ethernet HAT supports both 10/100Mbps Ethernet speeds and uses the popular W5500 chip, which provides a wide range of features such as TCP/IP protocol stack, network configuration, and data transfer. It also supports various network protocols such as TCP, UDP, ICMP, IPv4, ARP, IGMP, and PPPoE, This Product is known as ENC28J60, ENC28J60 Ethernet LAN Module, Ethernet, Ethernet LAN Module, HanRun, Module, Sensors, and Modules, SPI.
Features:
- Includes W5100S
- Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
- Supports 4 Independent Hardware SOCKETs simultaneously
- Internal 16 Kbytes Memory for TX/ RX Buffers
- Built-in LDO (LM8805SF5-33V)
- SPI Interface 5V I/O tolerance
- 10 / 100 Ethernet PHY embedded
- Supports Auto-Negotiation
- Full / Half Duplex
- Built-in RJ45 (RB1-125BAG1A)
Features/Specs:
- Product: Ethernet Modules
- Number of Ports: 1 x RJ45
- Data Rate: 10 Mb/s, 100 Mb/s
- Interface Type: Ethernet, SPI
- Supply Voltage – Min: 3.3 V
- Supply Voltage – Max: 5.5 V
- Operating Temperature: -40°C ~ 85°C
- Support Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
- Internal Memory: 16 Kbytes Memory for TX/ RX Buffers
- Interface: SPI Interface 5V I/O tolerance
- Supports Auto Negotiation: Full / Half Duplex 10 / 100 Based
- Lenght:68 mm
- Width: 21 mm
- Height: 17.78 mm
- Approx Weight: 15 gm
Applications:
- Home Network Devices: Set-Top Boxes, PVRs, Digital Media Adapters
- Serial-to-Ethernet: Access Controls, LED displays, Wireless AP relays, etc.
- Parallel-to-Ethernet: POS / Mini Printers, Copiers
Datasheet: W5100S – WIZnet Ethernet HAT
Package Includes:
- 1 x W5100S – WIZnet Ethernet HAT
- 2 x 1×20 pin Female Pin Header
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.