ESP-01 ESP8266 Serial WIFI Transceiver Module

ESP-01 ESP8266 Serial WIFI Transceiver Module

ESP8266 specifically for mobile devices, wearable electronics, and networking applications design and make the machine to achieve the lowest energy consumption, together with several other patented technology. This energy-efficient construction in three modes: active mode, sleep mode, and deep sleep mode type. When ESP8266 using high-end power management technology and logic systems to reduce non-essential functions of the power conversion regulate sleep patterns and work modes, in sleep mode, it consumes less than the current 12uA, is connected, it consumes less power to 1.0mW (DTIM = 3) or 0.5mW (DTIM = 10). Sleep mode, only calibrated real-time clock and watchdog in working condition. A real-time clock can be programmed to wake ESP8266 within a specific period of time. Through programming, ESP8266 will automatically wake up when detected certain to happen. ESP8266 automatic wake-up in the shortest time, this feature can be applied to the SOC for mobile devices, so before you turn Wi-Fi SOC is in a low-power standby mode. To meet the power requirements of mobile devices and wearable electronics products, ESP8266 is at close range when the PA output power can be reduced through software programming to reduce overall power consumption in order to adapt to different applications.
Maximum integration ESP8266 integrates the most critical components on the board, including power management components, TR switch, RF balun, a peak power of + 25dBm of PA, therefore, ESP8266 only guarantee the lowest BOM cost and is easy to be embedded in any system. ESP8266 BOM is the only external resistors, capacitors, and crystal.

Features/Specs:

• SDIO 2.0, SPI, UART
• 32-pin QFN package
• Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
• Integrated RISC processor, on-chip memory, and external memory interfaces
• Integrated M A C/baseband processors
• Quality of Service management
• I2S interface for high fidelity audio applications
• On-chip low-dropout linear regulators for all internal supplies
• Proprietary spurious-free clock generation architecture
• Integrated WEP, TKIP, AES, and WAPI engines
• 802.11 b/g/n
• Wi-Fi Direct (P2P), soft-AP
• Integrated TCP/IP protocol stack
• Integrated TR switch, balun, LNA, power amplifier, and matching network
• Integrated PLLs, regulators, DCXO, and power management units
• +19.5dBm output power in 802.11b mode
• Power down leakage current of <10uA
• Integrated low power 32-bit CPU could be used as an application processor
• SDIO 1.1/2.0, SPI, UART
• STBC, 11 MIMO, 2?1 MIMO
• A-MPDU & A-MSDU aggregation & 0.4ms guard interval
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW (DTIM3)
• Module Size:
• Length: 25mm
• Width: 15mm
• Height: 1.4mm
• Weight: 3gm

Package Includes:

• 1 x ESP-01 ESP8266 Serial WIFI Transceiver Module

Datasheet: ESP-01 ESP8266 Serial WIFI

Note: Product Images are shown for illustrative purposes only and may differ from the actual product.