AT24C256 I2C Interface EEPROM Memory Module
AT24C256C provides 262,144 bits of Serial Electrically Erasable and Programmable Read-Only Memory (EEPROM) organized as 32,768 words of 8 bits each. The device’s cascading feature allows up to eight devices to share a common 2-wire bus. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are
essential. The devices are available in space-saving 8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN, and 8-ball VFBGA packages. In addition, this device operates from 1.7V to 5.5V.
Note : FT24C256A & AT24C256 on IC chip
Features:
- Chipset: AT24C256.
- 8P chip seat, installation of AT24C256 chip
- Pin-powered on-board power indicator
- I2C communications required pull-up resistor
Features/Specs:
- Supply voltage Range: 1.8V to 5.5V
- Maximum Standby current: <1µA
- 64 bytes page write mode
- Partial page write operation allowed
- Internally organized: 32,768 ×8 (256K)
- Standard 2-wire bi-directional serial interface
- Schmitt trigger, filtered inputs for noise protection
- Self-timed write cycle (5ms maximum)
- 1 MHz (2.5V-5V), 400 kHz (1.8V) Compatibility
- Automatic erase before the write operation
- Write protect pin for hardware data protection
- High reliability: typically 1,000,000 cycles endurance.
- Length: 37 mm
- Width: 12 mm
- Height: 12 mm
- Approx Weight: 8 gm
Datasheet: AT24C256 I2C Interface EEPROM Memory Module
- 1 x AT24C256 I2C Interface EEPROM Memory Module
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.