Xbee Zigbee Shield for Arduino
This shield V03 can achieve a simple two crunodal ZigBee network, achieve wireless communication between with UNO R3, and allows the with UNO R3 to wireless communicate over a modified ZigBee protocol using the popular XBee module.
It is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions. Xbee radios are an awesome way to add wireless capability to your UNO R3 project and now it’s even easier with the XBee Shield. The shield form-factor mates directly with any dev board that has a UNO R3 standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions. The serial pins (DIN and DOUT) of the XBee are connected through an SPDT switch, which allows you to select a connection to either the UART pins (D0, D1) or any digital pins on the Arduino (D2 and D3 default). Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN and DOUT pins of the XBee. In the latest revision, the diode level shifter is replaced with a more robust MOSFET level shifter. The board also includes LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee. The UNO R3 reset button is brought out on the shield, and a 9×11 grid of 0.1′ holes are available for prototyping. The shield does not come with headers installed; we recommend the 6, and, 8-pin stackable headers. The XBee module is also not included.Â
Features: Mounts directly onto your UNO R3Â DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the UNO R3 (D2 and D3 default) 3.3V power regulation and MOSFET level shifting on-board 9×11 grid of 0.1′ spaced prototyping holes Reset button brought out to shield Power, DIN, DOUT, RSSI, and DIO5 indicator LEDs
Features/Specs
- 3.3V – 5V dual power output
- 3.3V – 5V IO compatible
- USB 2.0 protocol
- BitBang mode ready
- Easily connected to a PC via mini USB cable
- XBee-setting support software X-CTU
- Offers connecting ports for XBee modules.
- Serial Switch to allow TX and RX to allow PC to communicate with XBee or Arduino Directly via Com Port.
- Mounting holes for adding spacers or standoffs.
- Reset Switch Easily accessible.
- Stackable Header Format for expansion.
- AMS1117 Voltage regulator for the XBEE modules
- Offers Bluetooth functionality
Datasheet:-
Note: Product Images are shown for illustrative purposes only and may differ from actual product
Reviews
There are no reviews yet.