WIZnet W5300 Hardwired Network Protocol Embedded Ethernet Controller – LQFP-100 Package
W5300 is a 0.18 µm CMOS technology single chip into which 10/100 Ethernet controller, MAC, and TCP/IP are integrated. W5300 is designed for Internet-embedded applications where easy implementation, stability, high performance, and effective cost are required. W5300’s target application is the embedded internet solution requiring high performance such as a multi-media streaming service. Compared to the existing WIZnet chip solution, W5300 has been improved in memory and data process. W5300 is the most appropriate to the products of IPTV, IP-STB, and DTV transferring multi-media data with high capacity. Internet connectivity can be implemented easily and quickly only with a single chip having TCP/IP protocol and 10/100 Ethernet MAC & PHY.
Features:
- Supports hardwired TCP/IP protocols: TCP, UDP, ICMP, IPv4, ARP, IGMPv2, PPPoE, Ethernet
- Supports 8 independent SOCKETs simultaneously
- High network performance: Up to 50Mbps
- Supports hybrid TCP/IP stack(software and hardware TCP/IP stack)
- Supports PPPoE connection (with PAP/CHAP Authentication mode)
- IP Fragmentation is not supported
- Internal 128Kbytes memory for data communication(Internal TX/RX memory)
- More flexible allocation of internal TX/RX memory according to application throughput
- Supports memory-to-memory DMA (only 16bit Data bus width & slave mode)
- Embedded 10BaseT/100BaseTX Ethernet PHY
- Supports auto-negotiation (Full-duplex and half-duplex)
- Supports auto MDI/MDIX(Crossover)
- Supports network Indicator LEDs (TX, RX, Full/Half duplex, Collision, Link, Speed)
- Supports an external PHY instead of the internal PHY
- Supports 16/8 bit data bus width
- Supports 2 host interface modes (Direct address mode & Indirect address mode)
- External 25MHz operation frequency (For internal PLL logic, period=40ns)
- Internal 150MHz core operation frequency (PLL_CLK, period=about 6.67ns)
- Network operation frequency (NIC_CLK : 25MHz(100BaseTX) or 2.5MHz(10BaseT))
- 3.3V operation with 5V I/O signal tolerance
- Embedded power regulator for 1.8V core operation
- 0.18 µm CMOS technology
- 100LQFP 14X14 Lead-Free Package
Features/Specs:
- Manufacturer Part No: W5300
- Manufacturer: WIZnet
- Supply Voltage Range: 3V ~ 3.6V
- Product Type: Ethernet ICs
- Product: Ethernet Controllers
- Standard: 10BASE-T, 100BASE-TX
- Number of Transceivers: 1 Transceiver
- Data Rate: 10 Mb/s, 100 Mb/s
- Interface Type: 8-bit/16-bit, MDI, MDI-X
- Duplex: Full Duplex
- Moisture Sensitive: Yes
- Operating Temperature Range: -40°C ~ +85°C
- Mounting Style: SMD/SMT
- Package/Case: LQFP-100
Target Applications:
- The W5300 is well-suited for many embedded applications, including:
- Home Network Devices: Set-Top Boxes, PVRs, Digital Media Adapters
- Serial-to-Ethernet: Access Controls, LED displays, etc.
- Parallel-to-Ethernet: POS / Mini Printers, Copiers
- USB-to-Ethernet: Storage Devices, Network Printers
- GPIO-to-Ethernet: Home Network Sensors
- Security Systems: DVRs, Network Cameras, Kiosks
- Factory and Building Automation
- Medical Monitoring Equipment
- Embedded Servers
Datasheet: W5300
Useful Link: Click Here
Package includes:
- 1 x WIZnet W5300 Hardwired Network Protocol Embedded Ethernet Controller – LQFP-100 Package
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.