Showing 1–32 of 53 results

Seeed Studio XIAO ESP32C3 – Tiny MCU Board With Wifi And BLE Battery Charge Supported Module

536.43 (Excluding All Taxes)
  • Seeed Studio XIAO ESP32C3 – tiny MCU board with Wi-Fi and BLE, battery charge supported, power efficiency and rich Interface
  • Brand: Seeed Studio
  • Product: XIAO ESP32C3 – Tiny MCU board with Wi-Fi and BLE
  • Circuit operating voltage: 3.3V@200mA
  • Charging current: 50mA/100mA
  • Input voltage: 5V

MDD3A Cytron 3A 4V To 16V Dual Channel DC Motor Driver – Seeed Studio

691.63 (Excluding All Taxes)
  • Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
  • Bidirectional control for two brushed DC motor
  • Control one unipolar/bipolar stepper motor
  • Operating Voltage: DC 4V to 16V

SeeedStudio Grove Creator Kit- Gamma (40 in 1 Sensor Kit)

6,947.36 (Excluding All Taxes)
  • SeeedStudio Grove Creator Kit- Gamma (40 in 1 Sensor Kit)
  • Super friendly to beginner
  • Suitable for Arduino beginners
  • Suitable for STEAM teaching

SeeedStudio Grove GSR Sensor

893.43 (Excluding All Taxes)
  • SeeedStudio Grove GSR Sensor
  • Operating voltage:3.3V/5V
  • Sensitivity: Adjustable via a potentiometer
  • Input Signal: Resistance, NOT Conductivity

SeeedStudio Grove Vibration Sensor (SW-420)

293.43 (Excluding All Taxes)
  • SW-420 Vibration Sensor
  • Waterproof Module
  • Operating voltage: 3.3 V to 5 V
  • Digital interface
  • 4 cm x 2.4 cm PCB size

SeeedStudio Grove Green

268.19 (Excluding All Taxes)
  • Grove – Green LED
  • Operating Voltage: 3.3V/5V
  • Grove compatible interface
  • Adjustable LED brightness
  • Adjustable LED orientation
  • Emitting color: Green
  • Holes for mounting on the surface
  • On-board potentiometer

SeeedStudio Grove Arduino Beginner Kit (All-in-one Arduino Compatible Board)

2,947.36 (Excluding All Taxes)
  • SeeedStudio Grove - Arduino Beginner Kit -All-in-one Arduino Compatible Board 
  • Super friendly to beginner
  • Suitable for Arduino beginners
  • Suitable for STEAM teaching

SeeedStudio Grove Ultrasonic Ranger

398.53 (Excluding All Taxes)
  • Grove – Ultrasonic Ranger
  • Ultrasonic frequency: 40 kHz
  • Accuracy: 2 mm
  • Wide measurement range: 3 cm ~ 350 cm
  • Wide voltage level: 3.2 V~5.2 V
  • Operating current: 8 mA
  • Only 3 pins needed, so saves I/O resources
  • Output: PWM

SeeedStudio Grove – 16×2 LCD (White on Blue)

638.53 (Excluding All Taxes)
  • Grove – 16 x 2 LCD (White on Blue)
  • Display construction: 16 Characters * 2 Lines
  • Display mode: STN
  • On board MCU
  • I2C-bus interface
  • Support English and Japanese fonts

SeeedStudio Grove Infrared Receiver

338.73 (Excluding All Taxes)
  • Grove – Infrared Receiver
  • Operating Voltage: 3.3V – 5V
  • Distance range: 10 meter (max)
  • Grove compatible interface
  • Plug and play

SeeedStudio Grove Loudness Sensor

506.73 (Excluding All Taxes)
  • Grove – Loudness Sensor
  • Operating voltage: 3.5-10VDC (nominal 5V )
  • Working frequency: 50~2000 Hz
  • Sensitivity: -48 to 66 dB
  • S/N ratio: >58 dB
  • Output signal range: 0 – 1023 (Analog signal)
  • Gain adjustable via screw potentiometer
  • Wide supply voltage range Built-in signal filtering

SeeedStudio Grove Blue LED Button

311.73 (Excluding All Taxes)
  • Grove – Blue LED Button
  • Operating voltage: 3.3V/5V
  • Press resistance: <100 mΩ
  • Release resistance: >100 MΩ
  • LED Rated current: 50 mA
  • Grove digital interface
  • High switching speed
  • Low power consumption
  • Long operating life

SeeedStudio Grove Yellow LED Button

211.39 (Excluding All Taxes)
  • Grove – Yellow LED Button
  • Operating voltage: 3.3V/5V
  • Press resistance: <100 mΩ
  • Release resistance: >100 MΩ
  • LED rated current: 50 mA
  • Grove digital interface
  • High switching speed
  • Low power consumption
  • Long operating life

SeeedStudio Grove Red LED Button

191.29 (Excluding All Taxes)
  • Grove – Red LED Button
  • Operating voltage: 3.3V/5V
  • Press resistance: <100 mΩ
  • Release resistance: >100 MΩ
  • LED rated current: 50 mA
  • Grove digital interface
  • High switching speed
  • Low power consumption
  • Long operating life

SeeedStudio Grove Button

167.19 (Excluding All Taxes)
  • Grove compatible interface
  • Easy to use momentary ON/OFF button
  • Small size
  • Useful for GrovePi & GoPiGo robot kits

SeeedStudio Grove Infrared Emitter

304.22 (Excluding All Taxes)
  • Grove – Infrared Emitter
  • Operating voltage: 3.3 ~ 5V
  • Operating temperature: -40°C to 80 °C
  • Distance range: 10 meter (max)
  • Peak wavelength: 940nm
  • The angle of half intensity (ϕ) = ± 17°
  • Radiant intensity : 72 mW/sr
  • Grove compatible interface
  • Plug and play

SeeedStudio Grove Blue LED

188.19 (Excluding All Taxes)
  • Grove - Red Blue
  • Operating voltage: 3.3V/5V
  • Grove compatible interface
  • Adjustable LED brightness
  • Adjustable LED orientation
  • Emitting color: Blue

SeeedStudio Grove Red LED

168.19 (Excluding All Taxes)
  • Grove – Red LED
  • Operating voltage: 3.3V/5V
  • Grove compatible interface
  • Adjustable LED brightness
  • Adjustable LED orientation
  • Emitting color: Red
  • Holes for mounting on the surface
  • On-board potentiometer

SeeedStudio Grove Chainable RGB LED V2.0

183.12 (Excluding All Taxes)
  • Grove – Chainable RGB Led V2.0
  • Operating voltage: 5 V
  • Working temperature: -40˚C to 85˚C
  • Max working current: 60mA
  • Max chained LED quantity: 1024
  • 256 grayscale modulation output
  • Includes Grove connector cable

SeeedStudio Grove Thumb Joystick

549.86 (Excluding All Taxes)
  • Joystick Module
  • Analog output
  • Output analog value (X co-ordinate): 206-798, typical 516
  • Output analog value (Y co-ordinate): 203-797, typical 507
  • Grove compatible with 4 Pin universe 2.0mm connector

SeeedStudio Grove DHT11 Temperature & Humidity Sensor

550.86 (Excluding All Taxes)
  • Operating Voltage: 3.3 V / 5 V
  • Measuring current: 1.3 – 2.1 mA
  • Measuring Humidity Range: 5% – 95% RH
  • Measuring Temperature Range: -20 ~ 60℃

SeeedStudio Grove Relay

253.86 (Excluding All Taxes)
  1. SeeedStudio Grove Relay Module
  2. Operating current: 100 mA
  3. Trigger Voltage: 3VDC
  4. Switching Voltage: 250VAC@10A; 30VDC@10A
  5. Long-lasting life
  6. Contact indicator: LED
  7. Grove compatible module

SeeedStudio Grove Line Finder V1.1

338.56 (Excluding All Taxes)
  • Working voltage (DC): 5 V
  • Adjustable detecting Range
  • Comparator: LMV358
  • Photo reflective diode: RS-06WD
  • Digital output mode: TTL
  • Includes a Grove 4 pin buckled connector cable
  • Grove compatible interface

SeeedStudio Grove Magnetic Switch

295.69 (Excluding All Taxes)
  • Operating voltage: 4.75 V – 5.25 V
  • Switched power: 10 W
  • Switched voltage AC, RMS value (max) : <140 V
  • Switched current (DC): <500 mA

SeeedStudio Grove Light Sensor V1.2

253.96 (Excluding All Taxes)
  • Grove Light Sensor V1.2
  • Operating voltage: 3 to 5 V
  • Operating current: 0.5 mA to 3 mA
  • Peak wavelength: 540 nm
  • Quick response time

SeeedStudio Seeeduino Xiao Arduino Microcontroller SAMD21 Cortex M0+

658.98 (Excluding All Taxes)
  • Microcontroller: ATSAMD21
  • Operating Voltage: 3.3V
  • Digital I/O Pins: 11
  • PWM Enabled Pins:10
  • Analog I/O pins: 11
  • Flash Memory: 256 KB
  • SRAM: 32KB

SeeedStudio Grove Switch (P)

299.76 (Excluding All Taxes)
SeeedStudio Grove Switch

SeeedStudio Grove 4 Digit Display

529.22 (Excluding All Taxes)

4 Digit Display SeeedStudio Grove

SeeedStudio Base Shield V2 (UART and I2C Ports)

413.22 (Excluding All Taxes)
UART and I2C Ports SeeedStudio Base Shield V2

SeeedStudio Grove Speaker

665.56 (Excluding All Taxes)
  • Speaker SeeedStudio Grove 
  • Operating Voltage: 4~5.5VDC
  • Voltage Gain: 46dB
  • Bandwidth: 20KHz

6 Port I2C Hub-SeeedStudio Grove

369.00 (Excluding All Taxes)
SeeedStudio Grove – I2C Hub (6 Port)