Seeed Studio XIAO ESP32C3 – Tiny MCU Board With Wifi And BLE Battery Charge Supported Module
Seeed Studio XIAO ESP32C3 featuring ESP32C3 carries a complete Wi-Fi system along with Bluetooth Low Energy function. With its exquisite design and WiFi+BT ability, it’s perfect for various IoT controlling scenarios and complex carriable applications. The board equips highly-integrated ESP32-C3 SoC. The chip has been installed with a complete 2.4GHz Wi-Fi subsystem which means it supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode for multiple Wi-Fi applications. It works under an ultra-low power state, also supporting features of Bluetooth 5 and Bluetooth mesh. There are 400 KB SRAM & 4 MB Flash on the chip, allowing for more programming space, and bringing more possibilities to the IoT control scenarios.
Processor:
1. ESP32-C3 SoC
2. RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz
Wireless:
1. Complete 2.4GHz Wi-Fi subsystem
2. Bluetooth 5.0/ Bluetooth mesh
Interface:
- 1x UART, 1x IIC, 1x IIS, 1x SPI,11x GPIO(PWM), 4x ADC
- 1x Reset button, 1x Boot button
Features:
- Outstanding RF performance, Powerful ESP32-C3 SoC, and U.FL antenna provided that supports WiFi/Bluetooth connection over 100m.
- Thumb-size Design, 21 x 17.5mm overall dimension, portable and lightweight.
- Low power consumption, Lowest as 44 μA (deep sleep mode), with 4 working modes available.
- Onboard battery charge IC, Supports battery charging, is great for various wearable scenarios and wireless IoT applications.
- Ready for productization, Single-sided components design, easily integrated into other boards and Seeed provides Fusion Service for rapid production.
Features/Specs:
- Brand: Seeed Studio
- On-chip Memory: 400KB SRAM & 4MB Flash
- Circuit operating voltage: 3.3V@200mA
- Charging current: 50mA/100mA
- Input voltage (VIN): 5V
- Deep Sleep Power Consumption: >44μA
- Active Model: <75 mA
- Modem-sleep Model: <25 mA
- Light-sleep Model: <4 mA
- Length: 13.5 mm
- Width: 19 mm
- Height: 4.6 mm
- Weight: 5 gm
Applications:
- Internet of Things
- Wearable devices
- Health monitoring
- Education
- Low-Power(LP) networking
- Rapid prototyping
Documents:
Useful Links: Click Here
Package Includes:
- 1 x Seeed Studio XIAO ESP32C3 – Tiny MCU Board
- 1 x Antenna
Note: Product Images are shown for illustrative purposes only and may differ from the actual product
Reviews
There are no reviews yet.