TTGO T-Display-S3 Non Solder ESP32-S3 1.9inch LCD Display Development Board (H569 T-Display-S3)
T-Display-S3 Non Solder ESP32-S3 1.9inch LCD Display Touch Screen Development Board LILYGO® T-Display-S3 ESP32-S3 1.9 inch LCD Display Development Board WIFI Bluetooth5.0 Wireless Module 170*320 solution T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication or programming. Tags, ESP32-S3, LilyGO TTGO T-Display-S3, 1.9 inch TFT Display, LilyGO TTGO T-Display-S3 ESP32-S3 – with 1.9 inch TFT Display, XY230513, H577 T-Display-S3.
To Buy T-Display-S3 Enclosure: Click Here
Note: This Board Pin Header is not PreSolder. Solder by yourself.
Features:
- Battery charger
- Display
- ESP32-S3 Microcontroller
Internal Memory:
- SRAM: 512 Kb
- PSRAM: 8MB
- Flash memory: 16MB
- EEPROM Type: Emulated
MCU/SOC:
- Manufacturer: Espressif
- Chip series: ESP32-S3
- Clock Frequency: 240MHz
- Number of Cores: 2
Communication:
- I2C, I2S, SPI
- Native USB, UART
- PWM, ADC
- GPIO, USB CDC
Wireless Communication:
- Interface(s): Wi-Fi Bluetooth
- Wi-Fi Chip/SoC: ESP32-S3
- Wi-Fi Frequency: 2.4 GHz
- Bluetooth Chip/SoC: ESP32-S3
- Bluetooth Version: 5.0
- Supported Bluetooth standard(s): LE
Connector Details:
- Power supply connector(s): Pin header male (2.54mm)/ USB-C Female
- IO-Connector(s): JST-SH (Compatible) Male
- Pin Header Male: 2.54mm
- Battery Connector(s): Molex Picoblade (compatible) Male 2.54mm Pitch
- Wi-Fi/Bluetooth Antenna Connector: Built-in Antenna IPEX/uFL male (requires modification)
Battery Charging Specification:
- Battery chip/SoC: TP4054
- Supported Battery Chemistry: Li-ion Li-Po
- Maximum charging Voltage: 4.2V
- Maximum charging Current: 500 mA
- Adjustable Charging Current: No
- Protection Circuit: No
Display Details:
- Type: TFT
- Driver: ST7789
- Screen Diagonal: 1.9 Inch
- Number of Pixels long side: 320
- Number of Pixels short side: 170
- Pixel Colors: RGB
Features/Specs:
- Manufacturer: LilyGO TTGO
- Manufacturer SKU: H569 / XY230510
- supply Voltage: 3.3 ~ 5V
- IO-Pin Input Voltage: 3.3V
- IO-Pin Output Voltage: 3.3V
- IO-Pin Source Current: 20mA
- IO-Pin Sink Current: 28mA
- Mounting options: Pin headers
- Main Color: Black
- Length: 61 mm
- Width: 26 mm
- Weight: 14 gm
User Manual, Datasheet, Example Codes: Click Here
Useful Link: Click Here
Package Includes:
- 1 x TTGO T-Display-S3 Non Solder ESP32-S3 1.9inch LCD Display Development Board (H569 T-Display-S3)
- 1 x 1 2 Pin JST Connector
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.