STLINK-V3SET – Modular in-Circuit Debugger And Programmer For STM32/STM8
The STLINK-V3SET is a stand-alone modular debugging and programming probe for the STM8 and STM32 microcontrollers. This product is composed of the main module and the complementary adapter board. It supports the SWIM and JTAG/SWD interfaces for communication with any STM8 or STM32 microcontroller located on an application board. The STLINK-V3SET provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART. It also provides bridge interfaces to several communication protocols allowing, for instance, the programming of the target through the bootloader. The STLINK-V3SET can provide a second Virtual COM port interface allowing the host PC to communicate with the target microcontroller through another UART (called bridge UART). Bridge UART signals, including optional RTS and CTS, are available on the adapter board only (MB1440). The second Virtual COM port activation is done through a reversible firmware update, which also disables the mass storage interface (used for drag-and-drop Flash programming).
Features:
- Stand-alone probe with modular extensions
- Self-powered through a USB connector (Micro-B)
- USB 2.0 high-speed compatible interface
- Direct firmware update support (DFU)
- JTAG communication support
- SWIM low-speed and high-speed modes support
- 3V to 3.6V application voltage support on the UART interface and 5V tolerant inputs
- VCP frequency up to 15MHz
- Drag and drop flash programming
- Communication and power two color LEDs
Features/Specs:
- Manufacturer Part No: STLINK-V3SET
- Manufacturer: STMicroelectronics
- Product Category: Hardware Debuggers
- Series: STLINK-V3SET
- Product: In-Circuit Debuggers / Programmers
- Tool Is For Evaluation Of: STM8, STM32 MCUs
- Core: ARM Cortex M
- For Use With: GCC-based IDE, IAR EWARM, Keil MDK ARM
- Interface Type: CAN, GPIO, I2C, JTAG, SPI, SWD, UART, USB 2.0
- Operating Supply Voltage: 3V to 3.6V
Datasheet:
- User Manual: Click Here
- Technical Data Sheet: Click Here
- Product Change Notice: Click Here
Package Includes:
- 1 x STLINK-V3SET – Modular in-Circuit Debugger And Programmer For STM32/STM8
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.