10.1inch Capacitive Touch Display For Raspberry Pi/1280×800/IPS/DSI Interface – Waveshare
10.1inch Capacitive Touch Display For Raspberry Pi, 1280×800, IPS, DSI Interface up to 10-point touch, depending on the operating system up to 6H hardness toughened glass panelOptical Bonding, display well and dustproof. Tags, 10.1inch Display, 10.1-inch Display, 10.1″ Display.
To Buy More Waveshare Displays: Click Here
To Buy More Waveshare Products: Click Here
Hardware Connection:
Working with Pi4B/3B+/3B/3A+
- 1. Connect the DSI interface of the LCD to the DSI interface of the Raspberry Pi board.
- 2. The Raspberry Pi is installed on the display board with the back facing down, and the 5V power supply and I2C communication are connected through the 4PIN.
Working with Pi5/CM4/CM3+/CM3
- 1. Use the “DSI-Cable-12cm” ribbon cable to connect the LCD screen’s DSI interface to the Raspberry Pi’s 22PIN DSI1 interface.
- 2. The Raspberry Pi is mounted back-side down to the display baseboard and connected to the 5V power supply and I2C communications via a 4PIN top pin.
Features:
- 10.1-inch DSI touch screen with 10-point capacitive touch control.
- IPS display panel with a hardware resolution of 1280 x 800.
- Adopts optical bonding technique and clearer imaging.
- Toughened glass panel with 6H hardness.
- Supports Pi5/4B/CM4/3B+/3A+/3B/CM3+/CM3.
- Can be directly connected to the LCD by the DSI interface of the Raspberry Pi, and its refreshing rate is up to 60Hz.
- When working with the Raspberry Pi, it supports Bookworm/Bullseye/Buster.
- Support backlight adjusted by software.
Features/Specs:
- Manufacturer Part No: 10.1inch DSI LCD (C)
- Manufacturer: Waveshare
- Manufacturer SKU: 23450
- Display Size: 10.1 inch Touch Display
- Display Resolution: 1280×800
- Touch Type: Capacitive Touch Display
- Length: 147 mm
- Width: 239 mm
- Height: 10 mm
- Weight: 500 gm
Documents:
- Wiki: Click Here
- User Manual: Click Here
Package Contents:
- 1 x 10.1inch DSI LCD (C)
- 1 x FPC 15PIN 1.0 Pitch 50mm (Opposite sides)
- 1 x DSI-Cable-12cm
- 1 x FPC 15PIN 1.0 Pitch 160mm (Opposite sides)
- 1 x PH2.0 4PIN Cable 200mm
- 1 x Screws Pack
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.