UTP-11 100W Solder POT 38mm for Soldering Desoldering Bath
This is an extremely useful but scarcely used soldering station that can be the most effective method for removing and replacing components with a large number of leads. Featured by Sharvi Electronics, It can also be used for tinning wires and mass soldering of Printed Circuit Boards (PCBs). The Solder pot is filled with solder to the capacity of the pot. The solder pot should be full to the top edge of the container. The pot is built from high-quality stainless steel. The power capacity of the pot is 100W.
Caution:
- For Your Safety, Please Connect Ground/Earth.
- Using The Solder Pot, the temperature should not be too high.
- Before Turn ON the power, must put the solder into Pot of the solder Pot.
- If the solder pot can not be heated after turning ON the Power, Please check the Fuse is blown.
Warning:
- The solder pot should not work continuously under high temperatures.
Features/Specs:
- Part No: UTP-11
- Manufactured: Univot
- Input Voltage: 220V AC
- Power Rating: 100W
- Melting Time: 5 ~ 15 min
- Frequency: 50Hz to 60Hz
- Temperature Range: 200 ~ 450°C
- Pot Capacity: 300 g
- Material: Stainless Steel
- Approx Weight: 200 gm
Package Includes:
- 1 x UTP-11 100W Solder POT 38mm for Soldering Desoldering Bath
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.