9V Battery Snap Connector With Male DC Jack
9V snap connectors that are built stronger to last longer with DC jack, allow a simple connection to power device or circuit which has dc connector from a 9v battery. High quality with a firm connection to battery and DC socket connector. The 9v Battery Snap Connector + DC Jack(Battery Connector Cap) comes with the best quality material. It is widely using for project purposes. The 9V Battery Snap Connector with Power Plug provides the ability to conveniently use a 9V battery to power many common boards and modules such as the popular Arduino and compatible microcontrollers. This plug is a very common barrel type with an outside diameter of 5.5mm and an inside diameter of 2.1mm. The center is positive. This product know as 9V Battery Snap Cap with Male DC Connector, 9V Battery Snap Connector With Male DC Jack, Battery Snapper With DC Pin, 9V Battery Snap Cap with Male DC Jack Connector, 9V battery, Battery Connector, DC Jack, Battery Snap Connector, Battery Snapper Connector 9V DC.
Note: – 9v Battery Snap Connector Color will be Very Bay be Black or Blue
- Material: ABS
- Suitable Battery: 9V Battery
- Hard Plastic T-Type connector
- DC Connector Size: 2.1mm*5.5mm
- Plug Type: 2.1 x 5.5mm Male to 9V Battery Clip Material
- Stripped and Tinned leads: 1 Red and 1 Black
- Length of Cable: 12 CM
- Excellent material
- fine workmanship
- It is an environmental 9V battery buckle
- T- fonts, with red and black connecting lines
- Save power and protect the environment
- Good electrical conductivity and comfortable sense of touch
- This DC power plug can then be plugged into any DC power barrel jack (of equivalent size). The DC power barrel will then supply 9 volts to the circuit to which it is connected.
- This is very handy for any type of circuit where you want to supply 9 volts to the circuit and you want it to operate on battery power, or if you just don’t have a standard 9-volt power adapter.
- This setup with a 9V to Barrel Jack Adapter can be used to power your own custom-made circuit in which you power it with a DC plug plugged into the DC barrel, or it can be used to power boards with DC power barrel jacks installed into them. Many boards have DC barrels, including Arduino boards, parallax boards, and many others
- 1 x 9V Battery Snap Connector With Male DC Jack
Note: Product Images are shown for illustrative purposes only and may differ from the actual product