74HC4060 14-Stage Binary Ripple Counter IC – DIP-16 Package
The 74HC4060 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC, and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13), and an overriding asynchronous master reset (MR). The oscillator configuration allows the design of either RC or crystal oscillator circuits. The oscillator may be replaced by an external clock signal at input RS. In this case, keep the oscillator pins (RTC and CTC) floating. The counter advances on the HIGH-to-LOW transition of RS. A HIGH level on MR clears all counter stages and forces all outputs LOW, independent of the other input conditions. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Features/Specs:
- Supply Voltage: 7V
- Input Voltage: −1.5V to VCC + 1.5V
- Output Voltage: −0.5 to VCC + 0.5V
- Clamp Diode Current: ± 20 mA
- DC Output Current, per pin: ± 25 mA
- DC VCC or GND Current, per pin: ± 50 mA
- Storage Temperature Range: −65°C to + 150°C
- Power Dissipation: 600 mW
- S.O. Package only: 500 mW
- Lead Temperature (TL) (Soldering 10 seconds): 260°C
- Typical propagation delay: 16 ns
- Wide operating voltage range: 2–7V
- Low input current: 1 µA maximum
- Low quiescent current: 80 µA maximum (74 Series)
- Output drive capability: 10 LS-TTL loads
- Mounting: Through Hole
- Package: DIP-16
Applications:
- Control counters
- Timers
- Frequency dividers
- Time-delay circuits
Datasheet: 74HC4060
Package Includes:
- 1 x 74HC4060 14-Stage Binary Ripple Counter IC – DIP-16 Package
Note:- Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.