TDA7375A 2x37W Dual/Quad Power Amplifier for Car Radio
The TDA7375AV is a technology class AB car radio amplifier able to work either in a dual bridge or quad single-ended configuration. The exclusive fully complementary structure of the output stage and the internally fixed gain guarantee the highest possible power performances with an extremely reduced component count. The on-board clip detector simplifies gain compression operation. Featured by Sharvi Electronics The fault diagnostics makes it possible to detect mistakes during car radio set assembly and wiring in the car.
Features/Specs:
- Operating supply voltage: 8 t0 18 V
- VS DC supply voltage: 28 V
- Vpeak Peak supply voltage (for t = 50 ms): 40 V
- IO Output peak current (not repetitive t = 100 us): 4.5 A
- IO Output peak current (repetitive f > 10 Hz): 3.5 A
- Ptot Power dissipation (Tcase = 85 °C): 36 W
- Tstg, Tj Storage and junction temperature -40 to 150 c
- High output power capability
– 2 x 43 W max./4 Ohm
– 2 x 37 W/4 EIAJ
– 2 x 26 W/4 @14.4 V, 1 kHz, 10 %
– 4 x 7 W/4 @14.4 V, 1 kHz, 10 %
– 4 x 12 W/2 @14.4 V, 1 kHz, 10 % - Minimum external components count:
– No bootstrap capacitors
– No Boucherot cells
– Internally fixed gain (26 dB BTL)
– Standby function (CMOS compatible) - No audible pop during standby operations
- Diagnostics facility for:
– Clipping
– Out to GND short
– Out to VS short
– Soft short at turn-on
– Thermal shutdown proximity - Protections:
– Output AC/DC short circuit: to GND, to VS, and across the load
– Soft short at turn-on
– Overrating chip temperature with soft thermal limiter
– Load dump voltage surge
Package Includes:
- 1 x TDA7375A 2x37W Dual/Quad Power Amplifier for Car Radio
Datasheet: TDA7375A
Note: Product Images are shown for illustrative purposes only and may differ from the actual product
Reviews
There are no reviews yet.