TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC

TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC

TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which can control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 Arduino stepper motor driver has a wide range of power inputs and a 9~42VDC power supply. It is able to output a 4A peak current, which is enough for most of the stepper motors. The stepper driver supports speed and direction control. You can set its micro-step and output current with a 6 DIP switch. There are 7 kinds of micro-steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. All signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor. TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis Upgraded Version of the 42/57/86 Stepper Motors.

Features:

• Operating voltage: 9-40V DC
• Output Current: 0.7-4.0A
• Output current selectable in 8-steps via DIP switches
• Suitable for 2 and 4-phase motors
• Overcurrent and overheating protection
• Inputs are optically isolated
• H bridge bipolar constant current drive
• The biggest 4.0 A Eight kinds of output current are optional
• The biggest 32 To subdivide 6 kinds of subdivision modes selectable
• Input signal high-speed photoelectric isolation
• A total of standard single-pulse interface
• Offline retention function
• The semi-enclosed casing can adapt to a more stringent environment
• Provide energy-saving half-automatic current lock function

Features/Specs:

• Supply Voltage Range: 9 ~ 42V
• Supply Current Range: 0 ~ 5A
• Output Current: 3.3 to 24A
• Max Power Output: 160W
• Micro Step: 1, 2A, 2B, 8, 16, 32
• Operating Temperature: -10 to 50°C
• Pulse input frequency up to 20kHz
• 5V levels input signal
• 200-6400 pulse per revolution
• Logic signal current: 8-15mA
• Length: 98 mm
• Width: 56 mm
• Height: 30 mm
• Weight: 130 gm

Application: 

• Used for positioning stepper motors
• Used in CNC machines
• Used in 3D printers
• Used in antennas

Datasheet: TB6600 Stepper Motor Driver Controller

Package Includes :

• 1 x TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC

Note: Product Images are shown for illustrative purposes only and may differ from the actual product