Soil Moisture Sensor Module
Soil Moisture Sensor Module can be used to detect the moisture of soil or judge if there is water around the sensor, let the plants in your garden reach out for human help. Insert this module into the soil and then adjust the onboard potentiometer to adjust the sensitivity. The sensor would output logic HIGH/LOW when the moisture is higher/lower than the threshold set by the potentiometer. This is an easy-to-use digital soil moisture sensor. Just insert the sensor in the soil and it can measure moisture or water level content in it. It gives a digital output of 5V when the moisture level is high and 0V when the moisture level is low in the soil. The sensor includes a potentiometer to set the desired moisture threshold. When the sensor measures more moisture than the set threshold, the digital output goes high and an LED indicates the output. When the moisture in the soil is less than the set threshold, the output remains low. The digital output can be connected to a microcontroller to sense the moisture level. Featured by Sharvi Electronics The sensor also outputs an analog output which can be connected to the ADC of a microcontroller to get the exact moisture level in the soil. This sensor is great for making water gardening projects, water sensing, etc.
Pin Configuration:
VCC:- connect to 3.3V-5V
GND:- connect to GND
DO:- digital value output connector (0 or 1)
AO:- analog value output connector
Features/Specs:
- Chip: LM393 (stable operation)
- Operating voltage: 3.3V-5V
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable
- Panel PCB Dimension: Approx.3cm x 1.5cm
- Soil Probe Dimension: Approx. 6cm x 3cm
- Cable Length: Approx.21cm
- Mode: Dual output mode (accurate output)
Usage:-
- The soil moisture module is most sensitive to the ambient, generally used to detect the moisture content of the soil.
- When the module can not reach the threshold value, DO port output high, when the soil humidity exceeds a set threshold value, the module D0 output low.
- The small board digital output D0 can be connected directly to the MCU, MCU to detect high and low, to detect soil moisture.
- Small board digital output DO can directly drive the buzzer module or relay module in our store, which can form soil moisture alarm equipment.
- Small board analog output AO and AD module connected through the AD converter, you can get more precise values of soil moisture.
Package Includes:
- 1 x LM393 Module
- 1 x Soil Moisture Sensor Module
- 1 x Wires
Datasheet: Soil Moisture Sensor Module
Note: Product Images are shown for illustrative purposes only and may differ from the actual product
Reviews
There are no reviews yet.