NEMA17 2.6 kg-cm Single Shaft Stepper Motor
The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The NEMA17 2.6 kg-cm Stepper Motor can provide 2.6 kg-cm of torque at 0.4A current per phase. The motor’s position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The NEMA17 2.6 kg-cm Stepper Motor provides excellent response to starting, stopping, and reversing pulses from the stepper motor driver. They are very useful in various applications, especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters, etc.
It is a brushless DC motor, so the life of this motor is dependent upon the life of the bearings. The position control is achieved by a simple Open Loop control mechanism so it doesn’t require complex electronic control circuitry. The motor’s shaft has been machined for good grip with a pulley, drive gear, etc., and especially avoiding stall or slip. The NEMA17 Stepper Motor 72CM Detachable Cable is not included in this pack, buy it separately.
- Brand: NEMA
- Standard: NEMA 17
- Rated voltage: 12V
- Consumption current per coil: 0.4A
- Resolution: 200 steps/pr (with 1.8 °)
- Coil resistance: 30Ω
- Winding Inductance: 35mH
- Holding Moment: 2.6 kg*cm (0.25 Nm)
- Shaft Diameter: 5mm
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
- Step Angle: 1.8 Degree
- Step Angle Accuracy: +/-5%(Full step, no load)
- Resistance Accuracy : +/-10%
- Inductance Accuracy: +/-20%
- Temperature Rise : 80 Centigrade Max(rated current,2 phase on)
- Ambient Temperature : -20 Centigrade to +50 Centigrade
- Insulation Resistance: 100M¦¸ Min, 500V DC
- Dielectric Strength : 500V AC for 1 minute
- Shaft Radial Play : 0.02mm Max (450g Load)
- Shaft Axial Play: 0.08mm Max (450g Load)
- Max.Radial Force: 28N (20mm from the flange)
- Max.Adial Force: 10N
- Weight: 220gm
- 1 x NEMA17 2.6 kg-cm Single Shaft Stepper Motor
Datasheet: NEMA17 2.6 kg-cm Single Shaft Stepper Motor
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.