IR2136 3-Phase Bridge Driver

IR2136 3-Phase Bridge Driver

The IR2136x (J&S) are high voltage, high-speed power MOSFET, and IGBT drivers with three independent high and low side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3 V logic. A current trip function that terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that an overcurrent or Undervoltage shutdown has occurred. Overcurrent fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high-frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 V.

Feature/Specs:

• Gate drive supply range from 10V~20V
• Logic compatible: 3.3 V 
• Floating channel designed for bootstrap operation
• Fully operational to +600 V
• Tolerant to negative transient voltage, dV/dt immune
• Undervoltage lockout for all channels
• Over-current shutdown turns off all six drivers
• Independent 3 half-bridge drivers
• Matched propagation delay for all channels
• Cross-conduction prevention logic
• Low side output out of phase with inputs. High side outputs out of phase (IR213(6,63, 65, 66, 67, 68)), or in phase
• (IR21362) with inputs
• Lower di/dt gate drive for better noise immunity
• The externally programmable delay for automatic fault clear
• All parts are LEAD-FREE
• Packages: 28-Lead SOIC

Package Includes:

• 1 x IR2136 3-Phase Bridge Driver

Datasheet: IR2136