CJMCU 64 Bit 8×8 RGB LED Driver Development Board
CJMCU 64 Bit 8×8 RGB LED Driver Development Board a large board with 64 WS2812 RGB LEDs arranged in an 8×8 matrix. Each LED is capable of drawing as much as 60mA (at peak brightness the matrix can draw just over 3.5 Amps at 5 Volts), this adds up so it is suggested to use a 5V 2A power supply. For most users, you’ll see about 1-2A of current per panel. There are two 3-pin connection ports to the wiring board. Solder wires to the input port and provide 5VDC to the +5V and ground pins, then connect the DIN pin to your micro-controller and make a common ground from the 5V power supply to the micro-controller/Arduino.
Features/Specs:
- IC Chip: WS2812B
- Input Supply Voltage: 5VDC
- LED: 8×8 (64 RGB)
- Length: 66 mm
- Width: 66 mm
- Height: 8 mm
- Weight: 25 gm
Package Includes:
- 1 x CJMCU 64 Bit 8×8 RGB LED Driver Development Board
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.