CD4047 Astable/Monostable Multivibrator IC DIP-14 Package

CD4047 Astable/Monostable Multivibrator IC DIP-14 Package

CD4047 consists of a gatable astable multivibrator with logic techniques incorporated to permit positive or negative edge triggered monostable multivibrator action with retriggering and external counting options. Inputs include +TRIGGER, -TRIGGER, ASTABLE, ASTABLE\, RETRIGGER, and EXTERNAL RESET. Buffered outputs are Q\, Q and OSCILLATOR. In all modes of operation, an external capacitor must be connected between C-Timing and RC-Common terminal, and an external resistor must be connected between the R-Timing and RC-Common terminals. Astable operation is enabled by a high level on the STABLE input or a low level on the ASTABLE\ input, or both. The period of the square wave at the Q and Q\ Outputs in this mode off operation is a function of the external components employed. “True” input pulses on the ASTABLE input or “Complement” pulses on the ASTABLE\ input allow the circuit to be used as a gatable multivibrator. The OSCILLATOR output period will be half of the Q terminal output in the astable mode. However, a 50% duty cycle is not guaranteed at this output. The CD4047 triggers in the monostable mode when a positive-going edge occurs on the +TRIGGER-input while the -TRIGGER is held low. INput pulses may be of any duration relative to the output pulse. The CD4047-Series types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes), and 14-lead thin shrink small-outline packages (PW and PWR suffixes). This product is known as Featured by Sharvi Electronics CD4047 Astable/Monostable Multivibrator IC, CD4047MB Monostable Multivibrator IC, CD4047 Astable Multivibrator IC, CD4047BM, CD4047BNSR, CD4047BEE4, CD4047BMG4, CD4047BPW, CD4047BM96, CD4047BE, CD4047BPWR, CD4047BMT, CD4047BPWRE4, CD4047BM96G4

Features/Specs:

• Logic Family: CD4000
• Series: CD4047B
• Product Category: Monostable Multi-vibrator
• Elements per Chip: 1
• Logic Type: Monostable/Astable Multivibrator
• Supply Current: 0.02 mA
• Propagation Delay Time: 1000 ns, 450 ns, 300 ns
• High Level Output Current: -4.2 mA
• Low Level Output Current: 4.2 mA
• Supply Voltage: 5 ~ 15V
• Power Dissipation: 500 mW (1/2 W)
• Minimum Operating Temperature: -55 ~ +125°C
• Lower power consumption: special CMOS oscillator configuration
• Monostable (one-shot) or astable (free-running) operation
• True and complemented buffered outputs
• Only one external R anc C required
• Buffered inputs
• 100% tested for quiescent current at 20 V
• Standardized, symmetrical output characteristics
• Mounting Style: Through Hole
• Package/Case: PDIP-14
• Unit Weight: 1 g

Applications:

• Envelope detection
• Frequency multiplication
• Frequency division
• Frequency discriminators
• Timing circuits
• Time-delay applications

Package Includes:

• 1 x CD4047 Astable/Monostable Multivibrator IC DIP-14 Package

Datasheet: CD4047

Note: Product Images are shown for illustrative purposes only and may differ from the actual product.