Uno R3 Development Board compatible with Arduino
The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole uno family. The Uno R3 is an open-source microcontroller board based on the ATmega328 chip. This Board has 14 digital input/output pins, 6 analog input pins, an Onboard 16 MHz ceramic resonator, a Port for USB connection, an Onboard DC power jack, An ICSP header, and a microcontroller reset button. It contains everything needed to support the microcontroller. Using the board is also very easy, simply connect it to a computer with a USB cable or power it with a DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. While the UNO can be powered via the USB connection or with an external power supply, the power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board’s power jack. Also leads from a battery can be inserted in the Gnd and Vin pin headers of the Power connector. The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 5v to 12v for Uno Board.
Features/Specs:
- Microcontroller board based on the Atmega328P
- 14 digital input/output pins
- 6 can be used as PWM outputs
- 6 analog inputs
- A 16 MHz quartz crystal
- A USB connection
- A power jack
- An ICSP header
- A reset button
- Operating Voltage: 5V.
- Input Voltage: 7-12V
- DC Current: 40mA
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB
Datasheet: UNO R3 Development Board
Package includes:
- 1 x Uno R3 Development Board compatible with Arduino
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Irana –
Good Amount of Quality as par this Price.
debamon (verified owner) –
great product must buy
Kattunga –
D