AD590JH 2-Terminal Temperature Transducer IC – TO-52-3 Package

AD590JH 2-Terminal Temperature Transducer IC – TO-52-3 Package

The AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. For supply voltages between 4 V and 30 V, the device acts as a high impedance, constant current regulator passing 1 μA/K. Laser trimming of the chip’s thin-film resistors is used to calibrate the device to 298.2 μA output at 298.2 K (25°C). The AD590 should be used in any temperature-sensing application below 150°C in which conventional electricaltemperature sensors are currently employed. The inherent low cost of a monolithic integrated circuit combined with the elimination of support circuitry makes the AD590 an attractive alternative for many temperature measurement situations. Linearization circuitry, precision voltage amplifiers, resistance measuring circuitry, and cold junction compensation are not needed in applying the AD590. Tags, AD590 2-Terminal IC Temperature Transducer, AD590 Two-Terminal Temperature Transducer IC, AD590, AD590JHZ, AD 590, AD590 JHZ,  Temperature Sensor,590, AD590LF, AD590KF, AD590LH/883B, AD590KH, AD590MH.

Features:

• Linear current output: 1 μA/K
• Wide temperature range: −55°C to +150°C
• Probe-compatible ceramic sensor package
• 2-terminal device: voltage in/current out
• Laser trimmed to ±0.5°C calibration accuracy (AD590M)
• Excellent linearity: ±0.3°C over full range (AD590M)
• Wide power supply range: 4V to 30V
• Sensor isolation from case
• Available in 2-lead FLATPACK, 4-lead LFCSP, 3-pin TO-52

Features/Specs:

• Manufacturer Part No: AD590JH
• Manufacturer: Analog Devices Inc
• Series: AD590
• Product Type: Temperature Sensor ICs
• Output Type: Analog
• Configuration: Remote
• Accuracy: +/- 0.5°C
• Supply Voltage Range: 4V ~ 30V
• Operating Temperature: -55°C ~ +150°C
• Shutdown: No Shutdown
• Gain: +1 uA/K
• Mounting Style: Through Hole
• Package/Case: TO-52-3

Applicaction:

• AD590 sensor is used as a thermometer circuit that is able to measure temperature from -55℃ to +150℃ with an output voltage of 1 mV/°K in a remote temperature sensing application. This is the first example of the AD590 sensor application

Datasheet: AD590JH

Package Includes:

• 1 x AD590JH 2-Terminal Temperature Transducer IC – TO-52-3 Package

Note: Product Images are shown for illustrative purposes only and may differ from the actual product.