74LS93 4-Bit Binary Counter – DIP-14 Package
The CD74LS93 and CD74LST93 are high-speed silicon-gate CMOS devices and are pin-compatible with low power Schottky TTL (LSTTL). These 4-bit binary ripple counters consist of four master-slave flip-flops internally connected to provide a divide-by-two section and a divide- by-eight section. Each section has a separate clock input (CP0 and CP1) to initiate state changes of the counter on the HIGH to LOW clock transition. State changes of the Qn outputs do not occur simultaneously because of internal ripple delays. Therefore, decoded output signals are subject to decoding spikes and should not be used for clocks or strobes. A gated AND asynchronous master reset (MR1 and MR2) is provided which overrides both clocks and resets (clears) all flip-flops. Since the output from the divide-by-two section is not internally connected to the succeeding stages, the device may be operated in various counting modes. In a 4-bit ripple counter the output Q0 must be connected externally to input CP1. The input count pulses are applied to clock input CP0. Simultaneous frequency divisions of 2, 4, 8 and 16 are performed at the Q0, Q1, Q2 and Q3 outputs as shown in the function table. As a 3-bit ripple counter the input count pulses are applied to input CP1. Simultaneous frequency divisions of 2, 4 and 8 are available at the Q1, Q2 and Q3 outputs. Independent use of the first flip-flop is available if the reset function coincides with reset of the 3-bit ripple-through counter.
This product is known as 4 bit Binary Ripple Counter IC, 7493, 74HC93, 74HC93 4 Bit Binary Ripple Counter IC, 74XXX series IC, Binary Ripple Counter IC, CD74HC93E, CD74HC93M96, CD74HC93EE4, CD74HC93M, CD74HC93MT, CD74HCT93E.
Features/Specs:
- Series: SN74LS93
- Function: Counter
- Product Category: Counter ICs
- Counter Type: Binary
- Logic Family: LS
- Number of Bits: 4 bit
- Counting Sequence: Up
- Operating Supply Voltage: 4.75 V to 5.25 V
- Minimum Operating Temperature: 0°C
- Maximum Operating Temperature: +70°C
- Operating Temperature Range: 0°C to + 70°C
- Output Current: 8 mA/- 400 uA
- Product Type: Counter ICs
- Mounting Style: Through Hole
- Package/Case: DIP-14
Datasheet: 74LS93
Package Includes:
- 1 x 74LS93 4-Bit Binary Counter – DIP-14 Package
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.