74HC374 3-State Output Octal D-Type Flip-Flop IC DIP-20 Package
The 74HC373; 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
This product is known as SN74HC374DBR,SN74HC374AN, SN74HC374NSR, SN74HC374NE4, SN74HC374DW, CD74HC374M96E4, SN74HC374DWG4, CD74HC374M96, MC74HC374ADWG, 74HC374D, MM74HC374WM, MM74HC374MTCX, SN74HC374N, MC74HC374ADTR2G, CD74HC374M, SN74HC374DWR, CD74HC374E, 3-State Output Octal D-Type Flip-Flop IC, 3-State Output Octal D-Type Flip-Flop SMD IC, 74374 IC, 74374 SMD IC, 74HC374 IC, 74HC374 SMD IC.
Features:
- Wide Operating Voltage Range of 2 V to 6 V
- High-Current 3-State True Outputs Can Drive Up to 15 LSTTL Loads
- Eight D-Type Flip-Flops in a Single Package
- Full Parallel Access for Loading
- Low Power Consumption, 80-µA Max ICC
- Typical tpd = 14 ns
- ±6-mA Output Drive at 5 V
- Low Input Current of 1 µA Max
Features/Specs:
- Series: SN74HC374
- Product Type: Flip Flops
- Logic Family: HC
- Product Category: Flip-Flops
- Number of Circuits: 8
- Logic Type: D-Type Flip-Flop
- Polarity: Non-Inverting
- Input Type: CMOS
- Output Type: 3-State
- Propagation Delay Time: 230 ns
- High Level Output Current: – 7.8 mA
- Low Level Output Current: 7.8 mA
- Supply Voltage – Min: 2 V
- Supply Voltage – Max: 6 V
- Function: Tri-State Octal
- Number of Channels: 8
- Number of Input Lines: 3
- Number of Output Lines: 1
- Quiescent Current: 8 uA
- Minimum Operating Temperature: -40°C
- Maximum Operating Temperature: +85°C
- Mounting Style: Through Hole
- Package/Case: DIP-20
Datasheet: 74HC374
Package Includes:
- 1 x 74HC374 3-State Output Octal D-Type Flip-Flop IC DIP-20 Package
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Reviews
There are no reviews yet.