74HC273 Octal D-Type Flip-Flop With Reset IC – DIP-20 Package

74HC273 Octal D-Type Flip-Flop With Reset IC – DIP-20 Package

74HC273 Octal D-Type Flip-Flop With Reset IC – DIP-20 Package 74HC273 is a 20 Pin Octal D-Type Positive Edge Trigger Flip-Flop with Reset IC having 2V to 6V Operating Voltage range with 5.2mA output current and high noise immunity. The device features clock (CP) and master reset (MR) inputs. The outputs Qn will assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A LOW on MR forces the outputs LOW independently of clock and data inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This Product is known as 74HC273D-Q100J, SN74HC273DW, SN74HC273N, SN74HC273PW, MM74HC273MTC, N74HC273NE4, CD74HC273E, 74HC273D, 74273 IC, 74273 SMD IC, 74HC273 IC, 74HC273 SMD IC, Components, Electronic Components, Quad 2-Input Multiplexer IC, Quad 2-Input Multiplexer SMD IC

Features:

• Wide Operating Voltage Range of 2 V to 6 V
• Outputs Can Drive Up to 10 LSTTL Loads
• Low Power Consumption, 80-µA Maximum ICC
• Typical tpd = 12 ns
• ±4-mA Output Drive at 5 V
• Low Input Current of 1-µA Maximum
• Contain Eight Flip-Flops With Single-Rail Outputs
• Direct Clear Input

Features/Specs:

• Series: SN74HC273
• Function: Octal
• Logic Family: HC
• Product Category: Flip-Flops
• Number of Circuits: 8
• Logic Type: D-Type Flip-Flop
• Polarity: Non-Inverting
• Input Type: CMOS
• Output Type: CMOS
• Propagation Delay Time: 160 ns
• High-Level Output Current: – 5.2 mA
• Low-Level Output Current: 5.2 mA
• Supply Voltage – Min: 2 V
• Supply Voltage – Max: 6 V
• Number of Channels: 8
• Number of Input Lines: 2
• Number of Output Lines: 1
• Operating Supply Voltage: 6 V
• Operating Temperature Range: – 40°C to +85°C
• Quiescent Current: 8 uA
• Reset Type: Master Reset
• Mounting Style: Through Hole
• Package/Case: PDIP-20

Applications:

• Buffer or Storage Registers
• Shift Registers
• Pattern Generators

Package Includes:

• 1 x 74HC273 Octal D-Type Flip-Flop With Reset IC – DIP-20 Package

Note: Product Images are shown for illustrative purposes only and may differ from the actual product.