28BYJ-48 Stepper Motor and ULN2003 Stepper Motor With Driver

28BYJ-48 Stepper Motor and ULN2003 Stepper Motor With Driver

This 5V DC 28BYJ-48 Stepper Motor is a small, inexpensive, and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system. Thia 28BYJ-28 stepper motor is imported from one of our trusted suppliers and the supplier has guaranteed the quality of these compact stepper motors. The motor has a reduction ratio of 64:1, so it offers a decent torque for its size at speeds of about 15 RPM. It is a unipolar stepper motor that has 5-wires. As stated before the pack contains ULN2003 Stepper Motor Driver which is a Mini Stepper Motor Driver. The main purpose of ULN2003 is to amplify the control signals from the Arduino, so as to drive the 28BYJ-48 Stepper Motor. If you will give the ULN2003 stepper driver a certain pulse signal, it will drive the step motor to a certain angle. The control of the Stepper Motor movement angle is done by controlling the number of stepper motor driver pulses. The speed of the stepper motor rotation is also controllable by controlling the frequency of the pulses. Connect the 28BYJ-48 motor with the ULN2003 motor driver then interface this combination of motor and driver with Arduino, do some coding and your 28BYJ-48 Stepper Motor is ready to listen to your commands!!! Perfect.
Note: The system is recommended to run on Half-step mode(8 step control signal sequence) for an excellent performance experience. 
A (Blue), B (Pink), C (Yellow), D (Orange), E (Red, Mid-Point)

Features/Specs:

• Model: 28BYJ-48
• Rated Voltage: 5V
• Rated Current: 500mA
• Step Angle: 5.625°/64
• Reduction ratio: 64:1
• Resistance: 50Ω
• In-Traction Frequency: >600Hz
• Out-Traction Frequency: >1000Hz
• In-traction Torque: 34.3mN-m
• Self-positioning Torque: 34.3mN-m
• Friction Torque: 600-1200gf-cm
• Pull-in Torque: 300gf-cm
• Insulation Grade: A
• Shaft Type: Double D-Type
• Motor Weight: 34gm
• Length: 34mm
• Width: 18mm
• Height: 10mm
• Weight: 34gm

Package Includes :

• 1 x 28BYJ-48 Stepper Motor
• 1 x ULN2003 Stepper Motor Driver

Datasheet:
DATASHEET
EXAMPLE CODE

Note: Product Images are shown for illustrative purposes only and may differ from the actual product