5 cm (2.0 inch) SPI TFT LCD Color Screen Module ILI9225 Serial Interface 176 x 220
This lovely little display breakout is the best way to add a small, colorful, and bright display to any project. Since the 5 cm (2.0″) SPI TFT LCD Color Screen Module display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available. The 2.0″ display has 176×220 color pixels. Unlike the low-cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ILI9225) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there are no worries that your code will not work from one to the other. The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card.
- Driver IC: ILI9225
- Display Size: 2.0″
- Input Voltage: 3.3 to 5V
- Pixel Resolution: 176 x 220
- Interface Type: SPI
- Support analog SPI and hardware SPI
- The LCD has a wide viewing angle, the contrast is also very suitable.
- Good quality display.
- PCB Size in: mm
- Length: 62mm
- Width: 38mm
- Approx Weight: 20gm
- 1 x 5 cm (2.0″) SPI TFT LCD Color Screen Module ILI9225 Serial Interface 176 x 220
Note: Product Images are shown for illustrative purposes only and may differ from the actual product