16×2 LCD Display with I2C/IIC interface
This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast white text upon a blue background/backlight.
This is the great blue backlight LCD display. It is fantastic for Arduino based project. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.
This display overcomes the drawback of LCD1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which show a good library and little coding.
The I2C is a type of serial bus developed by Philips, which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up resistors. The usage voltages are standard as 5V and 3.3V.
If you already have the I2C adapter soldered onto the board like in this product, the wiring is quite easy. You should usually have only four pins to hook up. VCC and GND of course. The LCD display works with 5 Volts. So we go for the 5V Pin.
- Model: LCD1602
- Characters: 16
- Input Voltage: 5V
- Interface Type: I2C
- I2C Address: 0x27
- Character Color: White
- Backlight: Blue
- Arduino IIC/I2C interface was developed to reduce the IO port usage on the Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings.
- 16 characters wide, 2 rows
- White text on the Blue background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Length: 36mm
- Width: 80mm
- Height: 18mm
- Weight: 35gm
- 1 x 16×2 LCD Display with I2C/IIC interface
Note: Product Images are shown for illustrative purposes only and may differ from the actual product.