Showing 1–32 of 33 results

L298 2A Dual Motor Driver Module With PWM Control

115.00 (Excluding All Taxes)
L298N 2A Based Motor Driver Module-Good Quality

Refrigeration Thermoelectric Peltier Cooling System DIY Kit

452.36 (Excluding All Taxes)
Themoelectric Peltier water cooler cooling

A4988 Stepper Motor Driver Module

74.87 (Excluding All Taxes)
  • A4988 Stepper Motor Driver Module
  • Stepstick A4988 Stepper Driver Module

Adapter Breakout Board for ESP-32f ESP32 ESP-Wroom-32 Wireless Bluetooth Module

46.00 (Excluding All Taxes)
Adapter Breakout Board for ESP-32f Wireless Bluetooth Module

Cytron Enhanced 13Amp DC Motor Driver 30A Peak (10 seconds) MD10C

1,160.00 (Excluding All Taxes)
Cytron Enhanced 13Amp DC Motor Driver 30A Peak (10 seconds) MD10C

DRV8833 2 Channel DC Motor Driver

97.22 (Excluding All Taxes)
  • DRV8833 Motor Driver
  • Operating voltage: 2.7‌‌V ~ 10.8V
  • Output current: 1.2 A continuous (2 A peak) per motor
  • Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
  • Motor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor

DRV8825 Stepper Motor Driver Module (High Current)

265.00 (Excluding All Taxes)
DRV8825 Stepper Motor Driver Module (High Current) 3d printer

Mini Motor Drive Shield Expansion Board L293D Module For Arduino UNO MEGA 2560

128.69 (Excluding All Taxes)
  • L293D Motor Driver Module
  • L293D Motor Driver shield
  • Input Voltage Range: 4.5 To 24VDC
  • Output current Per Channel: 600mA
  • Peak Output current: 1.2A

MX1508 Dual H Bridge DC PWM Stepper Motor Driver

59.63 (Excluding All Taxes)
  • MX1508 PWM Stepper Motor Driver
  • The module supply voltage: 2V-10V
  • Signal input voltage: 1.8-7V
  • Single Opera: Ting current: 1.5A
  • Peak current: up to 2.5A

ULN2003 Stepper Motor Driver Board ARDUINO COMPATIBLE

48.00 (Excluding All Taxes)
ULN2003 Stepper Motor Driver Board ARDUINO COMPATIBLE

L9110 L9110S DC Stepper Motor Driver Board HBridge

100.00 (Excluding All Taxes)
L9110 L9110S DC Stepper Motor Driver Board HBridge

L293D Motor Driver Module

119.00 (Excluding All Taxes)
L293D Motor Driver Module

DC Motor PWM Speed Controller 6V to 28V 3A 80W Adjustable

265.00 (Excluding All Taxes)
DC Motor PWM Speed Controller 6V to 28V 3A 80W Adjustable

L293D Motor Driver Module

135.00 (Excluding All Taxes)
L293D Motor Driver Module

L298N Dual H Bridge DC/Stepper Motor Driver Controller Module

187.63 (Excluding All Taxes)
  • L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
  • Driver chip: L298N Dual H Bridge
  • Supply voltage: VMS 5V – 35V
  • Peak current IO: 2A per bridge
  • Max power consumption: 20Watt

A4988 Stepper Motor Driver Controller Board- RED

94.77 (Excluding All Taxes)
  • A4988 Stepper Motor Driver Controller Board- RED

12V-40V10A DC Motor PWM Speed Control Switch Governor

190.00 (Excluding All Taxes)
12V-40V10A DC Motor PWM Speed Control Switch Governor

TMC2208 Stepper Motor Driver Module

439.35 (Excluding All Taxes)
  • TMC2208 Stepper Motor Driver Module
  • Model: TMC2208
  • Native Micro steps: Up to 1/256
  • MicroPlyer Micro steps: 1/256
  • Logic Voltage VIO: 3 ~ 5V
  • Motor Voltage VM: 5.5  ~ 36V

TA6586 Based Motor Driver Module

190.63 (Excluding All Taxes)
  • TA6586 Based Motor Driver Module
  • Operating Voltage: 3 ~14VDC
  • Operating Current: 5A 
  • Can be connected directly to the output of 433MHz receiver

Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module

723.00 (Excluding All Taxes)
BTS7960 43A H-Bridge  Motor Driver Module

20A PWM DC Motor Speed Regulator Module(9~60V)

490.53 (Excluding All Taxes)
  • 20A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)
  • Operating Voltage: 9 ~ 60 VDC
  • Peak Current: 20 A
  • Continuous Current: 18 A
  • Continuous power: 1200W
  • PWM frequency: 25KHz
  • No. of Channels: 1
  • Output voltage: Load Linear
  • Type: Adjusting flow

1200 Watt 20A DC To DC Converter Boost Step-up Power Supply Module Input 8-60V Output 12-83V With Heat Sink

877.63 (Excluding All Taxes)
  • 1200W DC-DC Boost Step-Up Converter 8-60V to 12-83V 20A
  • Input Voltage: 10 to 60VDC
  • Output Voltage: 12 ~ 83V
  • Input Current: 20A
  • Output Current: 12A

Cytron Maker Pi Pico Base -Without Pico

872.63 (Excluding All Taxes)
  • Maker Pi Pico Base without Pico
  • Micro SD card socket
  • Stereo 3.5 mm audio
  • Buzzer/beeper (with sanity-saving Off switch)
  • RGB LED
  • 3 User Buttons

XY-L-1240 9V To 50V 40A 2000W PWM Motor Speed ​​Controller Module

397.63 (Excluding All Taxes)
  • 9-50V 2000W 40A DC Electronic Speeder PWM Motor Speed Controller 12/24/36/50V
  • Manufacturer Part No: XY-L-1240
  • Output Voltage: 9 ~ 50V DC
  • Input Voltage: 10 ~ 50V DC
  • Rated Current: 40A
  • Frequency: 12Khz

Brushless Motor Controller DC 12-36V 500W PWM Driver Board

1,249.22 (Excluding All Taxes)
  • 12V Brushless Motor Controller
  • Drive plate type: JYQD_V6.3E2
  • Voltage Range: 12~36V
  • Current handling Capacity: 15A
  • Power handling Capacity: 500W
  • Peak current: 20A
  • PWM speed control: PWM frequency 1-20KHZ.
  • Duty cycle: 0-100%
Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd. Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

L293D Motor Driver Board

135.00 (Excluding All Taxes)
L293D Motor Driver Board

MDD3A Cytron 3A 4V To 16V Dual Channel DC Motor Driver – Seeed Studio

691.63 (Excluding All Taxes)
  • Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
  • Bidirectional control for two brushed DC motor
  • Control one unipolar/bipolar stepper motor
  • Operating Voltage: DC 4V to 16V

Light System Expansion Board PH2.0 Expansion Module For Tamiya MFC-031

272.15 (Excluding All Taxes)
  • Light Expansion Board
  • Item Name: Light Expansion Board
  • Material: Plastic
  • Suitable for All RC Car

A3967 Stepper Motor Driver Module For Arduino

210.00 (Excluding All Taxes)
A3967 Stepper Motor Driver Module For Arduino.

HG7881 4 Channel 2.4 To 10VDC Motor Driver Broad

251.63 (Excluding All Taxes)
  • HG7881 4-Channel DC 2.4-10V Motor Driver Broad
  • Operating voltage: 2.5-12V
  • Suitable for: motor operating voltage 2.5V-12V
  • Operating current: 0.8A maximum
  • No. of channel: 4

2 Channel A4988/DRV8825 Stepper Motor Driver Controller Board- Red

244.77 (Excluding All Taxes)
  • Manufacturer Part No: ST2010SM1271
  • Manufacturer: Sharvi Technologies
  • Driver Support: 2A4988, DRV8825
  • No of Channel: 2